Mandatory Actions; Electrical Labels; Laser Hazards - Christie Cinema 2K-RBe Installation And Setup Manual

Mandatory actions

Caution! If not avoided, the following could result in minor or moderate injury.

Electrical labels

Indicates the presence of a protective earth ground.
Indicates the presence of an earth ground.

Laser hazards

Cinema 2K-RBe Installation and Setup Guide–CP2406-RBe, CP2409-RBe, and CP2411-RBe
020-103907-01 Rev. 1 (03-2024)
Copyright © 2024 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Consult the service manual.
Disconnect all power sources before performing maintenance or service procedures.
FDA laser variance (US projectors only)
This product is in conformity with performance
standards for laser products under 21 CFR 1040, except
with respect to those characteristics authorized by
Variance Number 2016-V-1838 effective on December
4, 2018.
CLASS 1 LASER PRODUCT IEC 60825-1:2014
Wavelengths: 449 nm - 661 nm
Indicates a light hazard. Do not look directly into the
lens. The extreme high brightness can cause permanent
eye damage.
Class 1 Laser Product - Risk Group 3 according to IEC
60825-1:2014 and IEC 62471-5:2015
Introduction
15