Keysight Technologies U9361C Measurement Manual page 26

Demonstrations
5. Select Input/Output > Calibration > Configuration to access the RCal Calibration
Configuration window.
6. Select Use Current Meas, then select the Calibrate check box > Calibrate Checked Rows to
populate a row using the current measurement settings, and run the calibration.
7. When calibration is complete, select Apply, then Close the window.
8. Disconnect the cable from the RCal RF Out port and connect it to the signal generator RF Out
port.
26 U9361C/F/G/M RCal Receiver Calibrator Measurement Guide