Canceling Editing Changes; Overview; Abandoning Changes At The End Of An Editing Session - Simplex 4005 Programming Instructions Manual

Canceling Editing Changes

Overview

Abandoning Changes at the
End of an Editing Session
Technical Manuals Online! - http://www.tech-man.com
The Restore CFIG option allows you to abandon all changes to the 4005 edit
buffer. There are two ways to abandon your changes to the 4005's edit buffer:
• At the end of an edit session
• Anytime during programming
To abandon changes at the end of an editing session, use the following steps:
1. Press and hold <Exit/Clear> after all your changes to the 4005
programming are made (A).
(GLW %XIIHU KDV &+$1*('
A.
>&DQFHO@ 5HVWRUH &),*
(GLW %XIIHU KDV &+$1*('
B.
&DQFHO >5HVWRUH &),*@
5HVWRULQJ &),*
C.
3UHVV (17(5 WR 5HVWRUH (;,7 WR &DQFHO
Figure 2-32. Typical Screens Used to Abandon
Changes at the End of an Editing Session
2. Press <ö> or <ì> to choose [
3. Press <Enter> (C).
4. Press <Enter> to confirm your selection or <Exit/Clear> to cancel.
The 4005 clears the edit buffer information. You can now start a new edit
session.
2-34
6DYH &),*
6DYH &),*
5HVWRUH &),*
] (B).
Continued on next page