Using The Any Qualifier; Using The All Qualifier - Simplex 4005 Programming Instructions Manual

Second Stage Fields,

Using the ANY Qualifier

Using the ALL Qualifier

Technical Manuals Online! - http://www.tech-man.com
Continued
When using the input condition qualifier ANY, a statement is true when the
specified number of points from Field B equals the number of points in the List
identified in Field D that are in the condition specified by Field C. The choices
for Fields B, C, and D are as follows:
• Field B – Point number value 001 to 255
• Field C – Conditions FIRE ACK, SUP ACK, TBL ACK, FIRE, SUP,
TBL, ON IN, ON CODE, PHY NRM, PHY ABN, PHY SHR, FIRE DET,
DISABLE, MAN
• Field D – List Points 22-01 through 22-25
Field A
$1<
SECOND STAGE
[ ]
FIELDS
Two-stage Input
Point Number
Condition
Value
Specifier
Figure 3-28. An Example Using the Input Condition Qualifier ANY
Example: When any one (1) point's condition in the List 22-01 is FIRE ACK,
Note: When choosing the ALL condition qualifier, there are only three
fields open for programming.
When using the input condition qualifier ALL, a statement is true when all points
specified in Field C are in the condition specified in Field B. The choices for
Fields B and C are as follows:
• Field B Conditions FIRE ACK, SUP ACK, TBL ACK, FIRE, SUP,
TBL, ON IN, ON CODE, PHY NRM, PHY ABN, PHY SHR, FIRE DET,
DISABLE, MAN
• Field C List Points 22-01 through 22-25
Field A
$//
SECOND STAGE [ ]
FIELDS
Two-stage Input
Condition
Specifier
Figure 3-29. An Example Using the ALL Condition Qualifier
Example: When all points in List 22-01 are in the condition of FIRE ACK, then
Field B

[ ]
Condition
then execute the output.
Field B
),5( $&.
[
Condition
List Point
execute the output.
3-18
Field C
),5( $&. 
[ ] [
List Point
Field C

] [ ] []
Continued on next page
Field D
]
Field D