Simplex 4005 Programming Instructions Manual page 103

Point Type Messages for Monitor Points,
Monitor Points (continued)
Technical Manuals Online! - http://www.tech-man.com
Pt. TYPE: S2STAGE
Circuit Status LCD Readout (2
Normal 2 Stage Monitor
Limited 2 Stage Monitor
Open 2 Stage Monitor
Short 2 Stage Monitor
Disable TBL 2 Stage Monitor
Class A TBL 2 Stage Monitor
Detailed Description: Used for 2 Stage Alarms. The current limited operation
of any device will indicate a STAGE 1 ALARM (press the <ö> key to
display). The shorting of the circuit, such as a key switch operation, will cause
a STAGE 2 ALARM (press the <ö> key to display).
Figure 5-24. S2STAGE Point Type
Pt. TYPE: SO Description: Sprinkler Supv (normally open)
Circuit Status LCD Readout (2
Normal Sprinkler Monitor
Limited Sprinkler Monitor
Open Sprinkler Monitor
Short Sprinkler Monitor
Disable TBL Sprinkler Monitor
Class A TBL Sprinkler Monitor
Detailed Description: Used to indicate sprinkler abnormal conditions such as
the operating of a PIV or OS&Y tamper switch. Must be used with normally
open contacts only.
Figure 5-25. SO Point Type
Pt. TYPE: SC Description: Sprinkler Supv (normally closed)
Circuit Status LCD Readout (2
Normal Sprinkler Monitor
Limited Sprinkler Monitor
Open Sprinkler Monitor
Short Sprinkler Monitor
Disable TBL Sprinkler Monitor
Class A TBL Sprinkler Monitor
Detailed Description: Used the same as SO except the contacts monitored must
be normally closed and a shunt resistor used. This type assures the zone will
not go into alarm with multiple tamper valves activated. Refer to Field Wiring
Diagram page 7 if 4-Point IDC 565-473 is used; or page 11 for a 4-Point IDC
565-610.
Figure 5-26. SC Point Type
5-9
Continued
Description: 2 Stage Monitor
nd
line)
nd
line)
SUPERVISORY
SUPERVISORY
nd
line)
SUPERVISORY
LED
NORMAL
ALARM A
TROUBLE T
ALARM A
TROUBLE T
TROUBLE T
LED
NORMAL
S
TROUBLE T
S
TROUBLE T
TROUBLE T
LED
S
NORMAL
TROUBLE T
TROUBLE T
TROUBLE T
TROUBLE T
Continued on next page