Simplex 4005 Programming Instructions Manual page 115

Point Type Messages for Auxiliary Relay Points,
Auxiliary Relay Points
(continued)
Technical Manuals Online! - http://www.tech-man.com
Pt. TYPE: BRELAY Description: Trouble / Supervisory Relay (on
until acknowledge) Operates on General Alarm
Circuit Status LCD Readout (2
On Alarm Relay
Off Alarm Relay
Alarm Relay
Disabled TBL Alarm Relay
Off Auto TBL Alarm Relay
Detailed Description: Used for trouble Relay ON (for Trouble or Supervisory)
until the condition is acknowledged.
Figure 5-55. BRELAY Point Type
Pt. TYPE: DHOLDER
Circuit Status LCD Readout (2
On Door Holder
Off Door Holder
Door Holder
Disabled TBL Door Holder
Off Auto TBL Door Holder
Used when the auxiliary relay is connected to door
Detailed Description:
holders. The relay energizes on alarm or on loss of AC Power. Relays stays
energized until reset.
Figure 5-56. DHOLDER Point Type
Pt. TYPE: SVISUAL Description: Visual (on until silence)
Operates on General Alarm
Circuit Status LCD Readout (2
On Visual
Off Visual
Visual
Disabled TBL Visual
Off Auto TBL Visual
Used on visual alarm device circuits that must be ON
Detailed Description:
until the alarm silence key is pressed (not supervised).
Figure 5-57. SVISUAL Point Type
5-21
Continued
nd
line)
Description: Door holder Control
(normally off) Operates on General Alarm
nd
line)
nd
line)
Continued on next page
LED
ON
OFF
CODING
TROUBLE T
TROUBLE T
LED
ON
OFF
CODING
TROUBLE T
TROUBLE T
LED
ON
OFF
CODING
TROUBLE T
TROUBLE T