Function Control - Simplex 4005 Programming Instructions Manual

Function Control while Viewing Points

Function Control

Technical Manuals Online! - http://www.tech-man.com
Certain Functions are allowed during the View Points session. To activate
Function Control for a specific point, use Steps 1 through 3 above to view the
point and then press <Function>. Refer to Table 2-2 for a list of functions based
on device types.
Table 2-2. Functions Based On Device Type
Device Type
Monitor
Relay
Signal
Digital (P27-P50)
Analog (A5-A25)
System Points
Lists
Generic Outputs
Use <Previous> or <Next> to scroll through the commands and then press
<Enter> to execute the command.
2-6
Available Function Commands
Clear Verification Tally
•
Turn ON the point
•
Turn OFF the point
•
Turn the point to AUTO
•
Change the point Priority
Change the Point Value
Turn ON/OFF certain points
•
Turn List ON
•
Turn List OFF
•
Turn List Auto
•
Turn ON the point
•
Turn OFF the point