Cautions And Warnings - Simplex 4005 Programming Instructions Manual

Copyright and Trademarks

Cautions and Warnings

Technical Manuals Online! - http://www.tech-man.com
Copyright  2000 by Simplex Time Recorder Company
All rights reserved. Simplex Plaza, Westminster, MA 01441
Printed in the United States of America.
Information in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form or by any means,
electronic or mechanical, for any purpose, without the express written consent of
Simplex Time Recorder Company.
Walk Test is protected by US Patent No. 4,725,818.
SYSTEM REACCEPTANCE TEST AFTER SOFTWARE CHANGES
proper system operation, this product must be tested in accordance with
NFPA72-1996, Chapter 7 after any programming operation or change in site-
specific software. Reacceptance testing is required after any change, addition or
deletion of system components, or after any modification, repair or adjustment to
system hardware or wiring.
All components, circuits, system operations, or software functions known to be
affected by a change must be 100% tested. In addition, to ensure that other
operations are not inadvertently affected, at least 10% of initiating devices that
are not directly affected by the change, up to a maximum of 50 devices, must
also be tested and proper system operation verified.
READ AND SAVE THESE INSTRUCTIONS
installation, operating and programming manuals. These instructions must be
followed to avoid damage to the control panel and associated equipment. Fire
Alarm Control Panel (FACP) operation and reliability depend upon proper
installation and programming.
DO NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS DAMAGED
Upon unpacking your Simplex product, inspect the contents of the carton for
shipping damage. If damage is apparent, immediately file a claim with the
carrier and notify Simplex.
ELECTRICAL HAZARD - Disconnect electrical power when making any internal
adjustments or repairs. Servicing should be performed by qualified Simplex
Representatives.
- Static electricity can damage components. Therefore,
STATIC HAZARD
handle as follows:
1. Ground yourself before opening or installing components (use the
553-484 Static Control Kit).
2. Keep uninstalled component wrapped in anti-static material at all times.
RADIO FREQUENCY ENERGY
radiate radio frequency energy and if not installed and used in accordance with
the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device
pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.
i
. Follow the instructions in the
- This equipment generates, uses, and can
- To ensure
.