Saving Editing Changes; Overview; Saving Changes At The End Of An Editing Session - Simplex 4005 Programming Instructions Manual

Saving Editing Changes

Overview

Saving Changes at the End of
an Editing Session
Technical Manuals Online! - http://www.tech-man.com
There are two ways to save the edit buffer information to the 4005's CFIG:
• At the end of an edit session
• Anytime during programming
To save changes at the end of an editing session, use the following steps:
1. Press and hold <Exit/Clear> after all your changes to the 4005
programming are made (A).
(GLW %XIIHU KDV &+$1*('
A.
>&DQFHO@ 5HVWRUH &),*
(GLW %XIIHU KDV &+$1*('
B.
&DQFHO 5HVWRUH &),*
C.
3UHVV (17(5 WR VDYH (;,7 WR &DQFHO
Figure 2-30. Typical Screens Used to Save Changes
at the End of an Editing Session
2. Press <ö> or <ì> to choose [
3. Press <Enter> (C).
4. Press <Enter> to confirm your selection or <Exit/Clear> to cancel.
The 4005 downloads the edit buffer information to the 4005 program.
When the download completes, the 4005 performs a cold start.
2-32
6DYH &),*
>6DYH &),*@
6DYLQJ &),*
6DYH &),*
] (B).
Continued on next page