Power Supply - Epson RC700 Series Original Instructions Manual

Installation 2. Installation

2.7.2 Power Supply

Specification
Ensure that the power meets the following specifications.
Voltage
Phase
Frequency
Momentary
Power Interrupt
Rated Capacity
Max. load current
48
Item
200 to 240 VAC
(Input voltage should be with in ±10 % of the rated voltage.)
Single phase
50/60 Hz
10 ms or less
Maximum : 2.5 kVA
Actual power consumption depends on the model, motion, and
load of the Manipulator.
For approximate power consumption of each model, refer to the
following values.
RC700 / RC700-A
C4
C12
N6
G3
G10
RS3
RC700DU / RC700DU-A
C4
N6
G3
G10
RS3
Refer to the Manipulator manual for rated capacity of the
Manipulator motor.
Max : 12.5 A
Actual Value depends on the model, motion, and load of the
Manipulator.
For approximate power consumption of each model, refer to the
following values.
RC700 / RC700-A
C4
C12 : 12.5 A
N6
G3
G10 : 12.0 A
RS3 : 6.0 A
RC700DU / RC700DU-A
C4
N6
G3
G10 : 12.0 A
RS3 : 6.0 A
Specification
: 1.7 kVA C8
: 2.5 kVA N2
: 2.2 kVA G1
: 1.1 kVA G6
: 2.4 kVA G20
: 1.2 kVA RS4
: 1.7 kVA C8
: 2.2 kVA G1
: 1.1 kVA G6
: 2.4 kVA G20
: 1.2 kVA RS4
: 8.5 A C8
N2
: 11.0 A G1
: 5.5 A G6
G20 : 12.0 A
RS4 : 7.0 A
: 8.5 A C8
: 11.0 A G1
: 5.5 A G6
G20 : 12.0 A
RS4 : 7.0 A
: 2.5 kVA
: 0.6 kVA
: 0.5 kVA
: 1.5 kVA
: 2.4 kVA
: 1.4 kVA
: 2.5 kVA
: 0.5 kVA
: 1.5 kVA
: 2.4 kVA
: 1.4 kVA
: 12.5 A
: 3.0 A
: 2.5 A
: 7.5 A
: 12.5 A
: 2.5 A
: 7.5 A
RC700 Series Rev.3