Epson RC700 Series Original Instructions Manual page 33

G3 :Table Top Mounting
■ Install the Table Top Mounting Manipulator with two or more people.
Manipulator weights are as follows. Be careful not to get hands, fingers, or feet
caught and/or have equipment damaged by a fall of the Manipulator.
G3-251* : approx. 14 kg: 31 lbs.
CAUTION
G3-301* : approx. 14 kg: 31 lbs.
G3-351* : approx. 14 kg: 31 lbs.
(1) Secure the base to the base table with four bolts.
NOTE
Use bolts with specifications conforming to

ISO898-1 property Class: 10.9 or 12.9.
Tightening torque: 32.0 N·m (326 kgf·cm)
(2) Using nippers, cut off the wire tie binding the
shaft and arm retaining bracket on the base.
(3) Remove the bolts securing the wire ties removed
in step (2).
(4) Remove the shipping bolt and jigs.
RC700 Series Rev.3
Installation 2. Installation
4-M8×30
Spring
Pane Washer
Screw Hole
(depth 20 mm or
more)
10 mm
Wire tie
The
Washer
Bolt: M4×15
Sheet
15