Epson RC700 Series Original Instructions Manual page 91

5. Second Step
After operating the robot system as instructed in 4. First Step, setup other functions as
necessary.
This section shows the manuals which contains information of necessary settings and
setting procedure.
5.1 Connection with External Equipment
5.1.1 Remote Control
EPSON RC+ 7.0 User's Guide 12. Remote Control
I/O
EPSON RC+ 7.0 User's Guide 11. Inputs and Outputs
RC700 series manual
Fieldbus I/O (Option)
5.1.2 Ethernet
EPSON RC+ 7.0 User's Guide
RC700 series manual
5.1.3 RS-232C (Option)
EPSON RC+ 7.0 User's Guide
RC700 series manual
5.1.4 Analog I/O board (Option)
RC700 series manual
5.1.5 Force Sensor I/F board (Option)
RC700 series manual
RC700 Series Rev.3
"12.1 Remote I/O"
"13. I/O Connector"
"16.2 Expansion I/O Board"
Robot Controller Option Fieldbus I/O Board
"1.9 Security for Controller Ethernet Connection"
"1.10 Security for Compact Vision CV2-A Ethernet Connection"
"1.11 Security for Feeder Ethernet Connection"
"4.3.3 Ethernet Communication"
"9. LAN (Ethernet Communication) Port"
"RS-232C Communication"
"16.4 RS-232C Board"
"16.6 Analog I/O Board"
"16.7 Force Sensor I/F Board"
Installation 5. Second Step
73