Epson RC700 Series Original Instructions Manual page 87

4. Run the program
(1) Press F5 to run the program. (F5 is the hot key for the [Run Window] selection of
(2) During project build, your program is compiled and linked. Then communications
(3) Click the Start button on the Run window to run the program.
(4) The texts like the following will be displayed in the status window.
RC700 Series Rev.3
the [Run] Menu). You will see the Status window located at the bottom of the main
window showing the build operation status.
are established with the Controller and project files are sent to the Controller. If
there are no errors during build, the Run window will appear.
19:32:45 Task main started
19:32:45 All tasks stopped
On the Run window, you will see the output of the print statement.
Installation 4. First Step
69