Table of Contents
Advertisement
74
Cockpit
Service indicator
This display reminds the driver when the next routine service
is due.
Displaying distance to next service
When you press the service button
the display will show how far the vehicle can be driven before the next service
is due. The query can be made with the engine switched off or in gear up to
speeds of 5 km/h. Every time the ignition is switched on, the remaining
distance is updated. However, the first time this will be after 500 km.
In new vehicles or following a service, the following display is given for the
first 500 km when the remaining distance until the next service is consulted:
Service reminder
The instrument panel controls the distance travelled every day. Calculate the
average of these distances travelled and enable the service reminder suffi-
ciently in advance.
Fig. 51 Detailed view of
the instrument panel:
Service indicator
A
briefly with the ignition switched on,
1
The display reverts back to the standard display after about 5 seconds. The
remaining distance to the next service is updated every time the ignition is
switched on, until the service becomes due.
Service due
When a service is due, SERVICE! will appear in the display immediately after
you switch on the ignition. The display reverts back to the standard display
after about 5 seconds.
Resetting the display
The display is reset by the garage after the service has been carried out. If the
service indicator has not been reset by the specialist garage, please perform
the following steps:
•
Switch the ignition off.
•
⇒ fig. 51
Press the service button
ignition. The display will show one of these messages: Service in ----- km or
Service!
•
Now press and hold the reset button
in ----- km --- days or Service!
The display switches out of the reset mode if you do not press the reset button
within 5 seconds.
Note
•
Do not reset the service indicator between services, otherwise the display
will be incorrect.
•
The information in the service indicator remains intact if the battery is
disconnected.
•
The distance to the next service cannot be called up if the system has
detected a Priority 1 fault (red symbol).
A
and hold while switching on the
1
A
until the display shows Service
2
Advertisement
Table of Contents
