Table of Contents
Advertisement
with a brief push of the button, or until the memory is cleared with a long
push of the button.
Setting speed limit warning 2
Speed limit warning 2 is set using the switches on the wind-
screen wiper lever.
Setting the speed limit
– Switch the ignition off.
– Briefly press the CHECK button in the instrument cluster
⇒ page 82, fig.
56. The distance display and the digital clock
will light up.
– Press the CHECK button for at least two seconds. The display will
show the speed limit which is currently set or, if no speed limit
has been set, the crossed out warning symbol for speed limit 2.
Safety First
Fig. 57 Windscreen wiper
lever: Function selector
switch
Operating instructions
– To change the speed limit, press the top or bottom of the function
selector switch on the windscreen wiper lever
speed limit displayed will then increase or decrease by 10 km/h
at a time.
Clearing the speed limit
– Switch the ignition off.
– Briefly press the CHECK button in the instrument cluster
⇒ page 82, fig.
56. The distance display and the digital clock
will light up.
– Press the CHECK button for at least two seconds. The display will
show the speed limit which is currently set.
– Now press and hold the Reset button on the windscreen wiper
A
⇒ fig. 57
lever
until the crossed out warning symbol for
B
speed limit 2 appears on the display.
The display lighting for the mileage recorder and digital clock goes off again
a few seconds after the button is released.
Practical tips
Cockpit
A
⇒ fig.
57. The
A
Technical Data
83
Advertisement
Table of Contents
