Table of Contents
Advertisement
Fitting the rear light unit
The rear light unit is easy to fit.
Safety First
Fig. 212 Fitting the rear
light unit
Fig. 213 Luggage
compartment: Location of
the bolt securing the rear
light unit
Operating instructions
– First place the rear light unit in
housing.
– Gently press the rear light unit against the housing, first in posi-
A
tion
and then in position
2
in the rubber mountings.
– Apply gentle pressure on the front side of the rear light unit and
secure using the screwdriver from the luggage compartment
⇒ fig. 213
A
.
1
– Try to move the rear light sideways to ensure it is correctly fitted.
A
– Replace the cover
in the interior trim.
2
– Put the screwdriver back into the tool kit.
– Make sure that all bulbs for the rear lights are working.
Caution
Take care when fitting the rear light unit to make sure there is no damage to
the paintwork or any of its components.
Practical tips
If and when
⇒ fig. 212
A
arrow
in the
1
A
, until that the clips engage firmly
3
Technical Data
265
Advertisement
Table of Contents
