Table of Contents
Advertisement
Sliding/Tilting
The sun roof will create less wind noise if it is opened in the
comfort setting.
Comfort setting
– Turn the control until it engages at position
roof will now only open as far as the comfort setting which means
there is less wind noise.
Opening completely
– Turn the switch to position
reaches the desired position. This position can cause more wind
noise.
Tilting open
– Turn the control to position
Safety First
Fig. 80 Details of head-
liner: Rotary sun roof
control
A
⇒ fig.
80. The sun
1
A
and hold it until the sun roof
2
A
.
0
Operating instructions
– With the control in position 0, press the control briefly to make
the roof tilt open all the way.
– To open the roof as far as an intermediate setting, press and hold
the control until the roof has moved to the desired position.
When you release the switch it will automatically spring back from position
A
A
to position
.
2
1
The sliding sun blind in the headliner automatically opens when the sunroof
is slid open. If required, it can be closed by hand when the sunroof is closed.
It is advisable to close the sun blind when the vehicle is left standing in the
sun. It is important to remember to close the sunroof when parking the
vehicle or if it suddenly starts raining – especially when the sun blind is
extended.
For further information on the automatic close function, see ⇒ page 110.
Closing
Closing
– Turn the control to position
⇒
.
Closing the sunroof from the tilt position
– Pull the specially formed rear end of the control and hold it until
the sunroof has moved down to the desired position.
– Pull the switch briefly to lower the sunroof automatically to the
fully closed position. If required, the sunroof can be stopped in
any position by briefly pulling the control again ⇒
Practical tips
Unlocking and locking
A
⇒ fig. 80
to close the sunroof
0
.
Technical Data
109
Advertisement
Table of Contents
