Table of Contents
Advertisement
Changing the main headlight bulb
The procedure for changing the bulbs on the front
passenger's side is the same as on the driver's side.
Safety First
Fig. 191 Main beam
headlights
Fig. 192 Main beam
headlights
Operating instructions
– Switch off the ignition and the lights.
– Raise the bonnet.
A
– Remove the rubber cover
⇒ fig. 192
– Remove the connector
⇒ fig. 192
– Press the spring
– Remove the bulb. pulling it from the connection terminal and
fitting fit the replacement so that it sits correctly in the cut-out on
the reflector. To ensure correct lighting, the filament must be
vertical. When changing the bulb, you can check the position of
the bulb through the headlight glass.
– Installation is in reverse order, ensuring that the rubber cover is
well fitted to the housing.
– Check whether the new bulb is working.
– Have the headlight settings checked as soon as possible.
Practical tips
If and when
⇒ fig. 191
by pulling it.
A
A
from the bulb.
1
A
inwards and to the right.
2
Technical Data
253
Advertisement
Table of Contents
