Table of Contents
Advertisement
Some of the functions in your vehicle can be adjusted, activated and
controlled via menus (e.g. tyre pressure*). With the aid of the menus you can
then also select the information you wish to see displayed on the DIS display.
This is only possible when the ignition is on. The menu is enabled using the
button on the windscreen wiper lever
Reset
The main menu lists the different display types (or basic commands):
Programming
Check
Menu off
Help
The main menu options have the following submenus:
Programming
Clock
Computer
Speed warning
Radio info (on/off)
Units: for measuring dis-
tance, fuel consumption and
temperature
Language: you can select
one of 6 languages.
Check
Service
Menu off
When the menu is switched off, the display shows the
same information as on vehicles without the menu func-
tion.
Help
This function helps you select the options you require.
Safety First
⇒ page 86, fig.
60.
⇒ page 87
⇒ page 87
⇒ page 81
⇒ page 87
⇒ page 87
⇒ page 74
Operating instructions
Controlling the menu
The menu display is called up via the
rocker switch on the windscreen wiper lever. Use these
controls to make checks and adjust the settings.
A
⇒ fig. 62
Functions of the
Reset
B
Enabling the menu
– Press the
button until the menu display
Reset
fig. 61
appears.
Selecting and setting
– Press the rocker switch to select one of the menus. Press "up" or
"down" on the switch to select the options accordingly.
Entering and confirming
– Press the
Reset
button.
Practical tips
Cockpit
button and the
Reset
Fig. 62 Windscreen wiper
lever: Reset button and
rocker switch
A
and the rocker switch
:
A
⇒ page 86,
Technical Data
87
Advertisement
Table of Contents
