Table of Contents
Advertisement
– Briefly press the knob
its set position.
– Turn the knob to the required setting.
– Press the knob in again to prevent the setting from being
changed unintentionally.
Settings
The settings roughly correspond to the following load conditions:
A
Two front occupants, luggage compartment empty
O
A
Full load of occupants, luggage compartment empty
1
A
Full load of occupants, luggage compartment loaded
2
A
Driver only, luggage compartment loaded
3
Caution
Always adjust the headlights to avoid dazzling oncoming traffic. Make sure
you lower the headlights when the vehicle is more heavily laden.
Dynamic headlight range control
On vehicles with xenon gas-discharge bulbs, the headlights automatically
adapt to suit the load being carried when the ignition is switched on. The
headlights are also automatically adjusted when the vehicle is in motion (e.g.
when accelerating and braking).
Safety First
⇒ page 116, fig. 87
to release it from
Operating instructions
Daytime running lights*
The daytime running lights are enabled automatically when
the ignition is switched on.
Enabling the functions
⇒ fig. 88
– Briefly press the knob
– Turn the knob to position 1.
– Press the knob in again to prevent the setting from being
changed unintentionally.
Disabling the functions
⇒ fig. 88
– Briefly press the knob
– Turn the knob to position 0.
Practical tips
Lights and visibility
Fig. 88 Switch for
daytime running lights
to release it from its set position.
to release it from its set position.
Technical Data
117
Advertisement
Table of Contents
