Table of Contents
Advertisement
– Press the switch
warning lights on or off.
All four indicators flash simultaneously when the hazard warning lights are
switched on. The hazard warning light indication lamps
signal indication lamp itself
lights also work when the ignition is switched off.
In an accident in which the airbags are triggered, the hazard warning lights
are switched on automatically.
Note
You should switch on the hazard warning lights to warn other road users, e.g.
•
When reaching the tail end of a traffic jam
•
If your vehicle breaks down or there is an emergency
•
If your vehicle is being towed away or if you are towing another vehicle
Safety First
⇒ page 118, fig. 90
to switch the hazard
and the turn
flash at the same time. The hazard warning
Operating instructions
Indicator
and main beam headlight lever
The turn signal and main beam headlight lever also operates
the parking lights and the headlight flasher.
The turn signal and main beam headlight lever has the following
functions:
Indicators
– Move the lever all the way up to indicate right or all the way down
⇒ fig.
to indicate left
91.
– Move the lever up or down just as far as the point of resistance
and hold it there: the indicators flash for as long as you hold the
lever (for instance when changing a lane).
– Move the lever briefly up or down as far as the point of resistance
and release it to signal briefly (the indicators flash three times).
Practical tips
Lights and visibility
Fig. 91 Turn signal and
main beam headlight
lever
Technical Data
119
Advertisement
Table of Contents
