Table of Contents
Advertisement
Button(s)
Meaning
Adjusts blower speed
- +
(centre buttons)
Air to the windows
Air from the dashboard outlets
Air to the footwells
The
,
and
buttons (which regulate air distribution) can either be
selected individually or in combination.
Automatic mode
AUTO
Standard setting for all seasons.
Switching on automatic mode
– Select a temperature between +18°C (64°F) and +29°C (86°F).
– Press the
button
AUTO
The automatic mode maintains a constant temperature inside the vehicle and
dehumidifies the air. Air temperature, air delivery and air distribution are
regulated automatically to reach the desired interior temperature as quickly
as possible, and then to maintain this temperature. The system automatically
compensates for any variations in the outside temperature and for the effect
of direct sunlight.
The automatic temperature regulation only operates at temperature settings
between +18°C and +29°C. If a temperature below +18°C is selected, LO
appears on the display. If a temperature is selected which is higher than
+29°C, the display will show HI. In the two extreme settings, the climate
control operates continuously with maximum cooling or heating output and
Safety First
⇒ page 154, fig.
133.
Operating instructions
Heating, Ventilation and Air conditioning
the temperature is not regulated automatically. The temperature is not regu-
lated.
Note
By keeping the
button on the driver's side pressed for several seconds,
AUTO
the temperature of the passenger's side can be set to the temperature of the
driver's side or vice versa. The display indicates the new temperature value.
Selecting the temperature
Separate temperatures can be selected for the driver's and
front passenger's side.
– Press the
or
buttons below the displays
-
+
fig. 133
until the desired temperature is selected for the driver's
side or front passenger's side.
The currently selected temperature setting is shown in the display above the
buttons.
By keeping the
AUTO
button on the driver's side pressed for several seconds,
the temperature of the passenger's side can be set to the temperature of the
driver's side or vice versa. The display indicates the new temperature value.
The previous temperature setting can be restored by resetting the display on
the driver's or passenger's side as required.
Practical tips
- +
⇒ page 154,
Technical Data
155
Advertisement
Table of Contents
