Seat EXEO 2009 Owner's Manual page 56

54 Child safety
Fitting the child restraint Top Tether to the anchoring point
Securing the child restraint Top Tether to the anchoring point
placed on the vehicle luggage compartment cover
– Pull the securing belt of the child restraint according to its manu-
facturer instructions for use.
– Direct the Top Tether securing belt under the rear seat head
⇒ fig. 35
restraint (lift the head restraint where necessary).
– Lift the luggage compartment cover anchorage cover -see detail-
⇒ fig.
35.
– Slide the belt so that the Top Tether belt is correctly secured to
the luggage compartment cover anchorage.
– Firmly tighten the Top Tether belt following the children restraint
manufacturer instructions.
Releasing the retaining strap
– Release the retainer strap in line with the instructions given by
the child safety seat manufacturer.
– Push the lock and release it from the anchoring support.
Read and bear in mind all the WARNINGS ⇒ page 53.
Fig. 35 Retainer strap:
correct adjustment and
fitting
WARNING