Seat EXEO 2009 Owner's Manual page 139

Hide thumbs Also See for EXEO 2009:
Table of Contents

Advertisement

Removing the head restraints
– Pull up the head restraint as far as it will go.
A
– Press button
and pull out the head restraint.
A
Fitting the head restraint
– Insert the head restraint in its guides until it clicks into place.
A
Press button
and lower the head restraint.
A
The height of the head restraints is adjustable. They should be set to suit the
height of the occupant. In combination with the seat belts, the head
restraints offer effective protection, provided they are properly adjusted.
For best protection, the top of the head restraint should be at least at eye level
or higher.
Head restraints of the side rear seats
Safety First
Fig. 111 Outer rear seats:
Head restraints
Operating instructions
Raising the head restraint
– Take hold of the sides of the head restraint with both hands.
– Pull up the head restraint as far as it will go.
Lowering the head restraint
A
⇒ fig. 111
– Press button
A
Removing the head restraint
– Pull up the head restraint as far as it will go.
A
⇒ fig. 111
– Press button
A
Fitting the head restraint
– Insert the head restraint in its guides until it clicks into place.
A
Press button
and lower the head restraint.
A
When the rear seats are not occupied, the head restraints should be moved
to the lowest position so that they do not obstruct the driver's field of
vision.
Practical tips
Seats and stowage
and lower the head restraint.
and pull out the head restraint.
Technical Data
137

Advertisement

Table of Contents
loading

Table of Contents