Table of Contents
Advertisement
Sunroof light
– Remove the bulb carefully, using the screwdriver on its flat side
⇒ fig.
223.
Safety First
Fig. 223 Removing
sunroof light
Fig. 224 Removing
sunroof light
Operating instructions
– Use a screwdriver to remove the protective cover.
– Remove the bulb, moving it in the direction of the arrow and
⇒ fig.
outwards
224.
Jump-starting
Jump leads
The jump lead must have a sufficient wire cross section.
If the engine fails to start because of a discharged battery, the battery can be
connected to the battery of another vehicle to start the engine.
Jump leads
Jump leads must comply with the standard DIN 72553 (see manufacturer's
documentation). The wire cross section must be at least 25 mm
2
engines and at least 35 mm
for diesel engines.
Note
•
The vehicles must not touch each other, otherwise electricity could flow as
soon as the positive terminals are connected.
•
The discharged battery must be properly connected to the vehicle elec-
trical system.
Practical tips
If and when
2
for petrol
Technical Data
271
Advertisement
Table of Contents
