Table of Contents
Advertisement
160
Heating, Ventilation and Air conditioning
Each of the three buttons has a specific function. The numbers relate to the
⇒ page 159, fig.
air outlets
Air directed to windows
This setting directs all the air to outlets 1 and 2. Unlike in setting
volume of air delivery remains the same.
Air to the driver/front passenger
All the air comes from outlets 3 and 4 in the dash panel and from the rear of
the centre console.
Air to the footwells
Most of the air emerges from outlets 5 and the outlets under the front seats.
Some of the air will also be issued from outlets 3 and 4.
Note
In all of the above air distribution settings, a small amount of air will still
come from the other outlets.
Economical use of the climate control
Economical use of the climate control will help save fuel.
Engine power is reduced and fuel consumption increases when the
climate control is in cooling mode. To ensure that the system is only
switched on when it is really necessary, please note the following
points:
– Select ECON mode if you wish to save fuel.
– Select ECON mode if you decide to open the windows or sun roof*
while driving.
135.
– If the vehicle has heated up after standing in the sun, open the
windows and doors for a short time to cool the vehicle.
, the
For the sake of the environment
By saving fuel you also reduce the amount of pollutants emitted from your
vehicle.
Key settings
When the ignition is switched on, the climate control settings
assigned to the key are selected automatically.
The climate control settings selected are automatically stored and assigned
to the key in use. When the vehicle is started, the climate control automati-
cally selects the settings assigned to the key. Hence, every driver automati-
cally obtains his/her preferred settings without having to select them manu-
ally.
Note
Should another driver use the key and enter other settings, the previous
settings will be deleted.
Advertisement
Table of Contents
