Seat EXEO 2009 Owner's Manual page 174

Hide thumbs Also See for EXEO 2009:
Table of Contents

Advertisement

172
Driving
Disabling cruise control temporarily
– Press the brake pedal or
– the clutch or
A
– press the lever
A
engaged).
– Any intervention of the TCS or the ESP will switch off the cruise
control.
The speed stored at this point remains in the memory if the system is only
temporarily deactivated.
To resume the programmed cruising speed, release the clutch or brake pedal
A
and pull the lever
to position
A
If no speed was stored when the system was temporarily disabled, a new
speed can be set as follows: drive at the desired cruising speed and briefly
⇒ page 171, fig. 143
press button
Fig. 144 Controls for the
cruise control system
⇒ fig. 144
A
a
to position
(click stop not
A
.
b
A
(SET).
B
WARNING
Retrieve the programmed speed only if this is not excessive for the current
traffic conditions. Failure to do so could result in an accident.
Disabling the cruise control
While driving
A
⇒ page 171, fig. 143
– Press the lever
A
stop engaged).
While the vehicle is stationary
– Switch the ignition off.
A
to position
(click
2

Advertisement

Table of Contents
loading

Table of Contents