Seat Ibiza Owner's Manual
  1. Manuals
  2. Brands
  3. Seat Manuals
  4. Automobile
  5. ibiza
  6. Owner's manual

Seat Ibiza Owner's Manual

Hide thumbs Also See for Ibiza:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
OWNER'S
MANUAL
Ibiza

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ibiza and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Seat Ibiza

Summary of Contents for Seat Ibiza

  • Page 1 OWNER’S MANUAL Ibiza...
  • Page 3 Foreword This Instruction Manual and its corresponding supplements should be read carefully to familiarise yourself with your vehicle. Besides the regular care and maintenance of the vehicle, its correct handling will help preserve its value. For safety reasons, always note the information concerning accessories, modifications and part replace- ments.

  • Page 5: Table Of Contents

    Sun protection equipment ....Seat belt tensioners* ..... .
  • Page 6 Table of Contents Vehicle maintenance and cleaning Jump-starting ........Towing or tow starting .

  • Page 7: About This Manual

    Due to the fact that this is a general manual for the IBIZA range, some of For the sake of the environment the equipment and functions that are described in this manual are not in- Texts preceded by this symbol contain relevant information concerning envi- cluded in all types or variants of the model;...

  • Page 8: Content

    2. Operation Information about the distribution of controls in the driver position of your vehicle, about the seat adjustment possibilities, about how to create a suit- able climate in the vehicle interior, etc. 3. Advice Advice relating to the driving, caring and maintenance of your vehicle and certain problems you can solve yourself.

  • Page 9: Safety

    ● Side airbags in the front seat backrests, with chest and head protection ● “ISOFIX” anchor points for “ISOFIX” rear child seat system ●...
  • Page 10 – When travelling long distances, take breaks regularly - at least every two hours. – Ensure that the passenger in the central rear seat always has the head restraint in the correct position for use. – If possible, avoid driving when you are tired or stressed.

  • Page 11: Proper Sitting Position For Occupants

    ● An incorrect sitting position of the driver can lead to severe injuries. straint position for driver. ● Adjust the driver seat so that there is at least 25 cm distance between ⇒  F ig. the centre of the chest and the centre of the steering wheel 1.
  • Page 12 ● Always keep your feet in the footwell when the vehicle is moving; Correct sitting position for front passenger never rest them on the dash panel, out the window or on the seat. An in- correct sitting position exposes you to an increased risk of injury in case of a sudden braking or an accident.
  • Page 13 – Sit up straight. – Adjust the head restraint to the correct position ⇒  p age 11. Fig. 3 Correctly adjusted – Always keep both feet in the footwell in front of the rear seat. head restraint viewed from the front and the –...
  • Page 14 Incorrect sitting positions substantially re- duce the protective function of seat belts and increase the risk of injury due to incorrect seat belt position. As the driver, you are re- sponsible for all passengers, especially children. – Never allow anyone to assume an incorrect sitting position in the vehicle while travelling ⇒ ...

  • Page 15: Pedal Area

    Safe driving WARNING WARNING ● Any incorrect sitting position increases the risk of severe injuries. ● Restricting pedal operation can lead to critical situations while driv- ing. ● Sitting in an incorrect position exposes the vehicle occupants to se- vere injuries if airbags are triggered, by striking a vehicle occupant who ●...

  • Page 16: Storing Objects

    ● During sudden manoeuvres or accidents, loose objects can be thrown forward, injuring vehicle occupants or even third parties. This increased Applies to the model: IBIZA ST risk of injury will be further increased if a loose object is struck by an in- Fastening rings* flating airbag.
  • Page 17 ● If pieces of baggage or other objects are secured to the fastening rings with inappropriate or damaged retaining cords, injuries could result in the event of sudden braking manoeuvres or accidents. ● Never secure a child seat on the fastening rings.  Safety...

  • Page 18: Seat Belts

    Seat belt warning lamp*  Number of seats Your vehicle has five seats, two in the front and three in the rear. Each seat is equipped with a three-point seat belt. In some versions, your vehicle is approved only for four seats. Two front seats and two rear seats.
  • Page 19 25 km/h (15 mph) . This acoustic signal stops when the seat belt is fastened. The warning lamp*  is switched off if the driver seat belt is fastened while the ignition is switched on. ...
  • Page 20 Even at low speeds the forces acting on the body in a collision are so great risk of injury. This is why it is so important to fasten seat belts before every that it is not possible to brace oneself with one's hands. In a frontal colli- trip, even when "just driving around the corner".
  • Page 21  ● Do not allow the seat belt to be damaged or jammed, or to rub on any sharp edges. ● Never wear the seat belt under the arm or in any other incorrect posi- Safety instructions on using seat belts tion.

  • Page 22: How To Wear Seat Belts Properly

    ● Never put the latch plate in the buckle of another seat. If you do this, the seat belt will not protect you properly and the risk of injury is in- creased.
  • Page 23 – Guide the belt back by hand so that it rolls up easily and the trim is not damaged. WARNING Never unbuckle a seat belt while the vehicle is in motion. If you do, you Fig. 14 Positioning seat increase the risk of sustaining severe or fatal injuries.

  • Page 24: Seat Belt Tensioners

    ● The relevant safety requirements must be observed when the vehicle or ● The shoulder part of the seat belt must lie on the centre of the shoul- components of the system are scrapped. Specialised workshops are famili- der, never across the neck.
  • Page 25 Seat belts WARNING (Continued) ● Any work on the belt tensioners and seat belts, including the removal and refitting of system parts in conjunction with other repair work, must be performed by a specialised workshop only. ● The belt tensioners will only provide protection for one accident and must be changed if they have been activated.

  • Page 26: Airbag System

    The airbag is deployed at high speed in fractions of a second. If you have an ● If you are not wearing a seat belt, if you lean forward or to the side incorrect seating position at the time the airbag is deployed, it could cause while travelling or assume an incorrect sitting position, there is a sub- you critical injuries.
  • Page 27 Control lamp for airbag and seat belt tensioner  WARNING ● If a child seat is secured to the front passenger seat, the risk to the The control lamp monitors all airbags and seat belt tensioners in the vehi- child of sustaining critical or fatal injuries in the event of an accident in- cle, including control units and wiring connections.
  • Page 28 Airbag system WARNING (Continued) WARNING ● To clean the steering wheel or dash panel, you may use only a dry or a ● If there is a malfunction, the airbag and belt tensioner system cannot water-moistened cloth. Never clean the dash panel and the airbag mod- properly perform its protective function.

  • Page 29: Front Airbags

    ● Safe distance with regard to the passenger airbag ⇒  p age 25, The dan- Important information on the front passenger front airbag ger of fitting a child seat on the front passenger seat. ● Objects between the front passenger and the front passenger airbag ⇒ ...
  • Page 30 ● The seat belts and airbags can only provide maximum protection if the occupants are seated correctly ⇒  p age 9, Proper sitting position for In conjunction with the seat belts, the front airbag system gives the front occupants. occupants additional protection for the head and chest in the event of a se- vere frontal collision ⇒ ...
  • Page 31 Thus, the head and chest are surrounded and protected by the airbag. After the collision, the ● The seat belts and airbags can only provide maximum protection if the occupants are seated correctly ⇒  p age 9, Proper sitting position for airbag deflates sufficiently to allow visibility.
  • Page 32 – Then turn the key gently to the ON position. Do not force it if you feel resistance, and make sure you have inserted the key fully. If you fit a rear-facing child seat to the front passenger seat, the front passenger front airbag must be de-activated.

  • Page 33: Side Airbags

    Other- wise, there is a risk of death. ● As soon as the child seat is no longer needed on the front passenger seat, enable the front passenger front airbag again.
  • Page 34 Airbag system Operation of side airbags ● there is a rear-end collision ● the vehicle turns over. The main parts of the side airbag system are: ● an electronic control and monitoring system (control unit) ● the side airbags in the sides of the backrests of the front seats, ●...

  • Page 35: Curtain Airbags

    ● Do not attempt to modify components of the airbag system in any way. ● If you do not wear a seat belt, if you lean forward, or are not seated correctly while the vehicle is in motion, you are at a greater risk of injury ●...
  • Page 36 Airbag system The area framed in red is covered by the curtain airbag when it is deployed ⇒  F ig. 25 (deployment area). Therefore, objects should never be placed or mounted in these areas ⇒  In the event of a side collision the curtain airbag is triggered on the impact side of the vehicle.

  • Page 37: Child Safety

    ● Always ensure that the seat belt is properly positioned according to the height and weight, children travelling on the rear seat must use a child seat or a seat belt. For safety reasons, this seat should be installed behind the instructions provided by the manufacturer of the child seat.

  • Page 38: Child Seats

    Child seats that have been tested and approved under the ECE R44 stand- ● Never leave an unsupervised child alone on a child seat or in the vehi- ard bear the test mark on the seat (the letter E in a circle with the test num- cle.
  • Page 39 ⇒  F ig. direction opposite to travel of travel or in the reverse, depending on the seat type. For safety reasons it is recommended that the child is transported in the direction opposite to Group 0+: Infants up to 13 kg (approx. 18 months old) must travel in the travel for as long as possible.

  • Page 40: Securing Child Seats

    1.5 metres tall are best protected by child seats with head restraints togeth- ⇒  F ig. er with properly worn seat belts You can secure a child seat to the rear seat or front passenger seat in the following ways: WARNING ●...
  • Page 41 Two “ISOFIX” retaining rings are fitted on each rear seat. In some vehicles, the rings are secured to the seat frame and in others they are secured to the ● Read and always observe information and warnings concerning the rear floor.
  • Page 42 Child seats with the Top Tether system come with a strap for securing the Forward-facing to 36 kg seat to the vehicle anchor point, located at the back of the rear seat back- rest and provide greater restraint. Suitable for ISOFIX universal child restraint systems approved for use in this weight group.
  • Page 43 WARNING – Firmly tighten the Top Tether belt following the child restraint An undue installation of the safety seat will increase the risk of injury in seat manufacturer's instructions. the event of a crash. ● Never tie the retainer strap to a hook in the luggage compartment.
  • Page 44 Cockpit Fig. 33 Dash panel.

  • Page 45: Operation

    Cockpit Operation Cockpit Overview Dash panel switches: – ESC OFF 133, 161 ..........–...

  • Page 46: Instruments

    Cockpit Rev counter* ⇒  p age 44 Switches on the steering column for audio and telephone* Fuse housing Digital display..........Speedometer ⇒ ...

  • Page 47: Digital Instrument Panel Display

    Cockpit Speedometer Digital clock* ⇒  F ig. The speedometer is equipped with a digital odometer and a trip recorder, in – To set the hour, press button 34. The “hour” option addition to a service intervals display. flashes on the digital display and is set using button “set”...
  • Page 48 Cockpit The multifunction display (MFD)* added to the existing trip recorder memory. The memory will automatically be deleted if the journey is interrupted for more than 2 hours. The total memory 2 collects the trip data for any number of individual jour- neys (even if the ignition is switched off for longer than 2 hours) up to a to- tal of 19 hours and 59 minutes travel time or 1,999 km distance travelled.
  • Page 49 Cockpit Ø km/h (mph) - Average speed Indicated speed warning After turning on the ignition, the average speed will be shown after travel- When the required speed has been reached, enter the “Speed warning” ⇒  F ig. 37 ling a distance of approximately 100 metres. Until then dashes will appear mode and press button .
  • Page 50  Technical progress has made it possible to considerably reduce servicing re- quirements. With the LongLife System, SEAT ensures that your vehicle only has an interval service when it is necessary. To calculate this (max. two years), the conditions under which the vehicle is used and the individual driving style are also taken into account.
  • Page 51 An overdue service is indicated by a minus sign in front of the mileage or day information. Resetting service interval display If the service was not performed by a SEAT dealership, the display must be reset as follows: ● Switch the ignition off.

  • Page 52: Warning Lamps

    ⇒  p age 54  Rear fog light switched on  ⇒  p age 16 Seat belt warning lamp*  ⇒  p age 54 Anti-lock brake system (ABS) * If flashing: the Electronic Stability ⇒  p age 55 Control (ESC) is working or the ASR ...

  • Page 53: Warning Symbols

    Cockpit Meaning of control and warning Further infor- Item Symbol WARNING lamps mation ● Failure to observe control lamps and warning messages can result in ⇒  p age 57  Fuel level / reserve serious personal injuries or damage to your vehicle. ●...
  • Page 54 Cockpit Information messages displayed on the screen* If several priority 1 faults are detected at the same time, the symbols will be displayed one after the other for about 2 seconds at a time and will contin- ue until the fault is corrected. Message Description No menus will be shown in the display for the duration of a priority 1 warn-...
  • Page 55 Cockpit The control lamp  lights up Warning: Start-Stop system activated. Switch off the igni- SWITCH OFF tion when you leave the vehicle. If the control lamp  lights up when the engine is started it means that the glow plugs are preheating. When the warning lamp goes off, the engine STOP TRANS- should be started straight away.

  • Page 56: Washer Fluid

    Cockpit Bulb defect*  WARNING The  warning lamp lights up when there is a fault on the turn signals, ● Always drive according to the road weather conditions, the terrain headlights, side lights and fog lights. and traffic. Driving recommendations should never lead to illegal ma- ...
  • Page 57 Cockpit Traction control system (ASR)*  /  The vehicle can still be braked in the normal way, without the ABS function. Take the vehicle to a specialised workshop as soon as possible. For further information on the ABS see the ⇒  p age 159. The traction control system prevents the driven wheels from spinning when the vehicle is accelerating.

  • Page 58: Brake System

    Cockpit This programme includes the ABS, EDL and ASR. It also includes emergency WARNING braking assistance (BAS). ● If the brake warning lamp does not go out, or if it lights up when driv- The warning lamp  has the following functions: ing, the brake fluid level in the reservoir is too low.
  • Page 59 Cockpit The tyre control lamp compares wheel revolutions and with it, the wheel WARNING diameter of each wheel using the ESC. If the diameter of a wheel changes, the tyre control lamp  lights up. The wheel diameter changes when: ●...

  • Page 60: Emission Control System

    Cockpit Door open display*  Note When towing the vehicle with the engine stopped or due to a fault in the This warning lamp lights up if one of the doors is open. power steering, this will not operate. The vehicle can still be steered, but it will require greater force to turn the steering wheel.
  • Page 61 The warning lamp  lights up when the ignition is switched on. It should go out when the engine has started running. The engine can, however, be started if the appropriate coded SEAT genuine key is used. ...
  • Page 62 Cockpit Note The vehicle cannot operate properly if you do not have a genuine SEAT key. ...

  • Page 63: Switches On The Steering Column

    Communications and multimedia Communications and multimedia Switches on the steering column* General information The steering column incorporates multifunctional modules from which to control audio and telephone functions on the vehicle. There are two versions of the multifunction module: ● Audio version, to control the available audio functions from the steering wheel.
  • Page 64 Communications and multimedia Audio Control Fig. 42 Audio controls. Short press Button Radio CD Audio MP3 CD AUX-IN VOL + Volume up VOL – Volume down MODE Cycle through source FM - AM - CD - FM... Station search. No function ...
  • Page 65 Communications and multimedia Audio + Telephone Control Fig. 43 Audio + Tele- phone controls. Short press Long press Button Audio CD / MP3 PND (Micro SD / Audio CD / MP3 PND (Micro SD / Radio AUX-IN Radio AUX-IN Bluetooth Audio) Bluetooth Audio) VOL + Volume up...

  • Page 66: Bluetooth System

    ”.  Use compatible Bluetooth devices only. For more information about compat- ible Bluetooth products, consult your dealership or the SEAT website. Some Bluetooth mobile phones are detected and connected automatically Bluetooth System* when the ignition is switched on. For this to take place the telephone must be switched on and its Bluetooth function activated, and there must be no active Bluetooth connection from other devices.
  • Page 67 SEAT offers the results of the compatibility ● Always observe applicable legislation. tests on different mobile phones. Visit the SEAT website or ask at your deal- ● Adjust the volume so that external warning sounds (e.g. emergency vehicles) are always audible.
  • Page 68 The pairing process can take several minutes depending on the size of the phone book. The procedure for pairing your mobile phone to the SEAT system for the first time is described below.  Pairing the mobile phone...
  • Page 69 When the telephone has been connected and the corresponding user pro- over again.  file created, your telephone will automatically link up with the SEAT tele- phone system under the following conditions: ● The mobile phone is switched on with the Bluetooth function activated Controls on the multifunction control and the visibility activated.
  • Page 70 Communications and multimedia on silent, it is possible that no sound will be heard through the vehicle Button effect speaker. “Push to talk” or “PTT” button. Short press: start or cancel the speech control system, interrupt Adjust the volume of your Bluetooth device to the maximum. ...
  • Page 71 Communications and multimedia The language is configured at the dealer and can only be changed at a SEAT Other commands for operating the Bluetooth system Official Service. Command Action The languages available in each vehicle depend on the destination of the CALL Call the contact in the phone book.
  • Page 72 Communications and multimedia digits pronounced coherently (complete number), in series of digits (sepa- rated by a brief pause) or in digits pronounced separately. After each series of digits (separated by a brief pause) the digits recognised until then are re- peated.

  • Page 73: Central Locking

    Opening and closing Opening and closing Central locking Locking the vehicle* ⇒  F ig. 49 – Press button on the remote control to lock all doors and  the rear lid or turn the key in the door to lock all doors and the rear lid. Description WARNING The central locking system enables you to lock and unlock all doors and the...
  • Page 74 Opening and closing Once this system is activated, opening doors from the outside and the in- WARNING side is not possible. The rear lid can not be opened. The central lock button does not work. No one should remain inside the vehicle if the “Safe” mechanism is acti- vated because opening the doors will not be possible in case of emergen- When the ignition is switched off, the instrument panel display indicates cy neither from the inside nor the outside and help from the outside is...
  • Page 75 Opening and closing Activating the selective unlocking system* Unlocking With the door open, insert a key into the start cylinder and start the ignition. On withdrawing the ignition key, the vehicle will returns to its status prior to Insert the other key into the driver door lock and turn in the opening direc- self-locking.
  • Page 76 Opening and closing Central lock button* WARNING ● If the vehicle is locked, children and disabled people may be trapped inside it. ● Repeated operation of central locking will prevent the central lock button from working for a few seconds. Then, it can only be unlocked in case it has been previously locked.

  • Page 77: Keys

    Opening and closing Keys The childproof lock prevents the rear doors from being opened from the inside. This system prevents minors from opening a door accidentally while the vehicle is running. Set of keys This function is independent of the vehicle electronic opening and locking systems.
  • Page 78 Opening and closing WARNING ● An incorrect use of the keys can cause serious injuries. ● Never leave children or disabled persons in the vehicle. In case of emergency, they may not be able to leave the vehicle or manage on their own.

  • Page 79: Radio Frequency Remote Control

    Opening and closing ⇒  F ig. 49 Radio frequency remote control* Unlocking the rear lid. Press button until all the turn signals  on the vehicle flash briefly. When the unlocking button is pressed,  you have 2 minutes to open the door. Once this time has passed, it will lock again.

  • Page 80: Anti-Theft Alarm System

    Opening and closing Anti-theft alarm system* For the sake of the environment Used batteries must be disposed of at an appropriate waste facility or through an authorised service, given that their components can affect the Description of anti-theft alarm system* environment.
  • Page 81 Opening and closing ● Movements in the driving compartment (vehicles with a volume sensor). ● The alarm system can be activated or deactivated using the radio fre- quency remote control ⇒  p age 77. ● Towing of the vehicle ● The anti-theft alarm is not activated when the vehicle is locked from ●...
  • Page 82 Opening and closing The vehicle interior monitoring and the anti-tow system are automatically Note switched on again next time the vehicle is locked. ● If the vehicle is relocked and the alarm is activated without the volumet- The vehicle interior monitoring and anti-tow sensor (tilt sensor) are auto- ric sensor function, relocking will activate the alarm with all its functions, matically switched on when the anti-theft alarm is switched on.
  • Page 83 Opening and closing When the vehicle is locked, the alarm will be triggered if move- ments are detected in the interior (e.g. by animals) or if the vehi- cle's inclination is changed (e.g. during transport). You can prevent the alarm from being triggered accidentally by switching off the ve- hicle interior monitoring and/or tow-away protection.

  • Page 84: Rear Lid

    Opening and closing Rear lid Closing the rear lid – Hold the rear lid by one of the two handles on the interior lining and close it, pushing slightly. Unlocking and locking This system may or may not be operative, depending on the situation of the vehicle.
  • Page 85 – Insert the key in the groove and unlock the locking system, turn- ⇒  F ig. ing the key from right to left, as shown by the arrow ⇒  F ig.  Fig. 54 IBIZA / IBIZA SC: Unlocking the rear lid manually. Safety Operation...

  • Page 86: Electric Windows

    Opening and closing to close the window ⇒  . Electric windows – Pull button  Always close the windows fully if you park the vehicle or leave it unattended ⇒  Opening or closing the windows electrically* You can use the electric windows for approx. 10 minutes after switching off the ignition if neither the driver door nor the front passenger door has been opened and the key has not been removed from the ignition.
  • Page 87 Opening and closing One-touch opening WARNING (Continued) – Push down the window button briefly up to the second position. ● If the ignition is switched on, the electric equipment could be activa- The window opens fully. ted with risk of injury, for example, in the electric windows. ●...

  • Page 88: Panoramic Tilting Sunroof

    Opening and closing ● If the window is still obstructed, the window will stop at this point. – Release the key to interrupt this function. ● If there is no obvious reason why the window cannot be closed, try to Using the remote control close it again by pulling the tab within ten seconds.
  • Page 89 Opening and closing Closing the panoramic/tilting sunroof WARNING ⇒  F ig. 58 ⇒  . The roof starts to – Press and hold button ● Incorrect use of the tilting sunroof can result in injury. close until the button is released. ●...
  • Page 90 Opening and closing Roll-back function of the panoramic/tilting sunroof* The panoramic/tilting sunroof has a roll-back function which prevents larger objects getting trapped when the roof is closed. The roll-back function does not prevent fingers getting pinched against the roof opening. The tilting sunroof stops and opens again immediately if it is obstructed when closing.

  • Page 91: Lights And Visibility

    Lights and visibility Lights and visibility Lights Switching on the rear fog light (vehicles with front fog lights) – Turn the lights control from position  or  to the second stop and pull out ⇒  . A control lamp on the instrument panel lights Switching lights on and off ...

  • Page 92: Automatic Lighting

    Lights and visibility Automatic lighting* Note ● For those vehicles with the automatic headlight system, when the key is removed from the ignition, the audible warning will only sound if the light knob is in position  or . ● If the daylight driving automatic light function is switched on, the fog lights or rear fog light cannot be switched on in addition.

  • Page 93: Daytime Driving Lights

    Lights and visibility Daytime driving lights* Instrument and switch lighting When the headlights are switched on, the brightness of the instruments and switch lighting can be regulated to suit your requirements by turning Daytime driving lights light up automatically when the ignition is switched ⇒ ...
  • Page 94 Lights and visibility The aforementioned lights are switched on each time the ignition is turned When driving around bends, the headlights will light the most important on if the light switch is in position 0 or . Depending upon the model, the areas of the road.
  • Page 95 Lights and visibility Coming Home/Leaving Home Function* ● If the light switch is turned to position . ● If the ignition is switched on. The Coming Home function is controlled manually. The Leaving Home func- Manual Leaving Home function tion is controlled with a photosensor. In vehicles without automatic headlight system (light sensor), if the manual If the Coming Home or Leaving Home function is connected, the front side Coming Home is activated on leaving the car, on returning to the car and un-...

  • Page 96: Hazard Warning Lights

    Lights and visibility 2. Press the button to switch on the hazard warning lights ⇒  . After approximately 8 minutes, the heating device of the rear window switches off automatically. 3. Switch the ignition off. For the sake of the environment 4.
  • Page 97 Lights and visibility Switching main beam on and off Note – Turn the light switch to position . ● The battery will run down if the hazard warning lights are left on for a long time, even if the ignition is switched off. ⇒ ...

  • Page 98: Interior Lights

    Lights and visibility Interior lights Note ● The turn signals only work when the ignition is switched on. The corre- sponding warning lamp  or  flashes in the instrument panel. The control Front interior light lamp  flashes when the turn signals are operated, provided a trailer is correctly attached and connected to the vehicle.

  • Page 99: Advice

    Lights and visibility Glove compartment light Note If not all the vehicle doors are closed, the interior lights will be switched off When opening the glove compartment on the passenger side, the glove after approx. 10 minutes, providing the ignition key has been removed and compartment light will automatically turn on and will turn off upon closure.

  • Page 100: Windscreen Wipers

    Lights and visibility The driver sun visor has compartments for cards, and the passenger sun vi- – Move the control to the left or right to set the length of the sor has a vanity mirror with a cover*. wipe intervals. Control to the left: long intervals; control to the right: short intervals.
  • Page 101 Lights and visibility Rain sensor* CAUTION In icy conditions, always check that the wiper blades are not frozen to the glass before using the wipers for the first time. If you switch on the wind- screen wipers when the wiper blades are frozen to the windscreen, you could damage both the wiper blades and the wiper motor.
  • Page 102 Lights and visibility Rear window wiper  WARNING ● Worn and dirty wiper blades reduce visibility and safety levels while driving. ● Always note the corresponding warnings ⇒  p age 194. CAUTION In icy conditions, always check that the wiper blade is not frozen to the glass before using the wiper for the first time.

  • Page 103: Rear View Mirrors

    Lights and visibility Automatic anti-dazzle interior rear vision mirror* Note ● To ensure that the headlight washers work properly in winter, keep the nozzle holders in the bumper free of snow and remove any ice with a de-icer spray. ● To remove water, the windscreen wipers will be activated from time to time, the headlight washers will be activated every three cycles.
  • Page 104 Lights and visibility The exterior mirrors can be adjusted using the rotary knob in the Note driver door. ● The automatic anti-dazzle function will only work properly if the sun blind* for the rear window is retracted and there are no other objects pre- Basic setting of exterior mirrors venting light from reaching the interior rear vision mirror.
  • Page 105 Lights and visibility WARNING ● Convex or aspheric mirrors increase the field of vision however the objects appear smaller and further away in the mirrors. If you use these mirrors to estimate the distance to vehicles behind you when changing lane, you could make a mistake.

  • Page 106: Head Restraints

    Seats and storage Seats and storage Head restraints – To lower the head restraint, press the button and push head re- straint downwards. – Make sure that the head restraint engages securely in one of its Removing or adjusting head restraints positions ⇒ ...

  • Page 107: Front Seats

    Note – Take your weight off the backrest and turn the hand wheel. ● To fit and remove the rear head restraints, gently tilt the seat backrest forwards. ● When fitting the head restraints again, insert the tubes as far as possi- WARNING ble into the guides without pressing the button.
  • Page 108 – To disconnect the heating, press the switch again. The Easy-Entry function facilitates the access to the vehicle rear seats. Be- fore lifting the backrest, return the seat to the original position. The seat in- serts when the backrest is lifted.
  • Page 109 Seats and storage Note The seats are only heated electrically when the engine is running.  Safety Operation Advice Technical specifications...

  • Page 110: Rear Seats

    – Pull the release button in the direction of the arrow and fold the backrest forwards. – Insert the head restraints in the spaces on the rear of the seat cushion which are visible when the seat cushion is lowered. Folding seat forward –...
  • Page 111 ● Do no trap or damage seat belts when raising the backrest. ● After raising the backrest, check it has engaged properly in position. Do this by pulling on the central seat belt or directly on the backrest and check that the position lever is in the neutral position.

  • Page 112: Storage Compartment

    Seats and storage Storage compartment WARNING Always keep the storage compartment cover closed while the vehicle is Storage compartment on the front passenger side in motion in order to reduce the risk of injury caused by a sudden braking or by an accident. ...
  • Page 113 Fig. 84 Mounting brack- Fig. 86 Storage com- et for navigator on dash partment under the front panel. passenger seat. To open – The compartment is opened by pulling on the lever and assist- ing it with your hand. To close –...
  • Page 114 Seats and storage Seat storage pocket* Front drink holder* Fig. 88 Front drink hold- Fig. 87 Storage pocket. ers in the centre console. There is a storage pocket on the rear of the front seats. In the centre console, in front of the gear lever, there are two drink holders ...

  • Page 115: Ashtrays, Cigarette Lighter And Power Socket

    Seats and storage Rear drink holder* Ashtrays, cigarette lighter and power socket Front ashtray* Fig. 89 Drink holder in the centre console. On the rear part of the centre console, behind the handbrake, there is a ⇒  F ig. drink holder* installed Fig.

  • Page 116: Cigarette Lighter

    Seats and storage Cigarette lighter* Power socket Fig. 92 Front power Fig. 91 Lighter. socket. ⇒  F ig. 91 to activate it ⇒  . – Press on the cigarette lighter The 12 Volt cigarette lighter power socket can also be used for other electri- cal components with a power rating of up to 120 Watt.

  • Page 117: First-Aid Kit, Warning Triangle, Fire Extinguisher

    Seats and storage Auxiliary audio connection (AUX)* Applies to the model: IBIZA ST Power socket in the luggage compartment* Fig. 93 Detailed view of the side trim in the lug- Fig. 94 Centre console: gage compartment: 12 AUX Connection. volt socket ⇒ ...

  • Page 118: Warning Triangle

    ● The first aid kit, the warning triangles and the fire extinguisher should meet legal requirements. Applies to the model: IBIZA ST ● The expiry date of the content of the first aid kit should be checked. First-aid kit and fire extinguisher* ●...

  • Page 119: Luggage Compartment

    Seats and storage ● Ensure that the fire extinguisher is fully functional. The fire extinguisher WARNING should, therefore, be checked regularly. The sticker on the fire extinguisher will inform you of the next date for checking. ● Unsecured objects in the luggage compartment can suddenly shift ●...
  • Page 120 Seats and storage Applies to the model: IBIZA ST Applies to the model: IBIZA ST Fastening rings* Luggage net* Fig. 98 Location of fas- tening rings in luggage Fig. 99 Stretched lug- compartment. gage net. There are four fastening rings in the luggage compartment, which The luggage net can be used to secure and retain light items in the can be used to secure loads.
  • Page 121 Note ● Ensure that, when placing items of clothing on the luggage compart- ment cover, rear visibility is not reduced.  Applies to the model: IBIZA ST Rear shelf with storage compartment* Fig. 100 Rear shelf. Removing the shelf ⇒  F ig. 100 –...

  • Page 122: Roof Carrier System

    Seats and storage To remove the storage compartment ● For safety reasons, only luggage racks and accessories supplied by SEAT Official Services are recommended. – Remove the rear shelf and pull the storage compartment up- ● It is essential that you follow the assembly instructions included with ⇒ ...
  • Page 123 ● Always secure the crossbars and the roof carrier system properly. ● Check threaded joints and attachments travelling and if necessary Fig. 104 Ibiza ST: at- tighten them after you have travelled a short distance. When making tachment points for the long trips, check the threaded joints whenever you stop for a rest.
  • Page 124 Seats and storage WARNING (Continued) ● Always fit the special roof carrier systems correctly for wheels, skis and surfboards, etc. ● Do not modify or repair the crossbars or roof carrier system. Note Always read the assembly instructions that come with the crossbars and the roof carrier system carefully and keep them in the vehicle.

  • Page 125: Air Conditioning

    Air conditioning Air conditioning Heating Blower The air flow can be set at four speeds with switch . The blower should al- ways be set at the lowest speed when driving slowly. Controls Air distribution Control for setting the flow of air in the required direction. ...
  • Page 126 Air conditioning – Turn blower switch to any of the head settings 1 -4. WARNING – Set the airflow to the desired direction using air distribution ● For your safety, the windows should never be fogged up or covered control with snow or ice.

  • Page 127: Air Conditioning

    Air conditioning – Close outlets Air distribution Symbol Main air output through outlets – Open and turn outlets towards side windows. 1, 2  Once the windows are demisted and as a preventive measure, the control can be set in position , thus obtaining greater comfort while prevent- ...
  • Page 128 Air conditioning The air conditioning system only works when the engine is running WARNING and the fan is switched on. For your safety, the windows should never be fogged up or covered with ⇒  F ig. 108 – Controls and control regulate the tem- snow or ice.
  • Page 129 Air conditioning – Turn the blower switch to any of the settings 1-4. ● The outside temperature is lower than approximately +3 °C (+37 °F). ● The air conditioning system compressor has been temporarily switched – Set the air distribution control to the air flow configuration off because of an increased engine coolant temperature.

  • Page 130: Climatronic

    Air conditioning Climatronic Note ● When engaging reverse gear, the air recirculation is connected automat- ically to prevent the entrance of exhaust gases in the vehicle on travelling Controls backwards. The control lamp on the button does not light up. ...
  • Page 131 Air conditioning Automatic mode Interior temperature indicator selected Air flow direction indicator In automatic mode air temperature, air flow and distribution are Fan speed increase automatically regulated so that a specified temperature is attained Fan speed decrease as quickly as possible, and then maintained. Interior temperature increase Interior temperature decrease Switching on automatic mode...
  • Page 132 Air conditioning Manual mode Air recirculation mode In manual mode the air temperature, flow, and the desired air dis- – Press the button to switch air recirculation mode on or off.  ⇒  F ig. 110 tribution can be adjusted. This is ON if the symbol ...

  • Page 133: General Notes

    Air conditioning General notes ● The air conditioner operates most effectively with the windows and the sliding/tilting sunroof* closed. However, if the temperature inside the vehi- cle is excessive because of the sun, the air inside can be cooled faster by Pollution filter opening the windows for a short time.

  • Page 134: Driving

    ● To avoid accidents, the steering column should be adjusted only when the vehicle is stationary. ● Adjust the driver seat or steering wheel so that there is a distance of ⇒  F ig. at least 25 cm between the steering wheel and your chest 111.

  • Page 135: Electronic Stability Control (Esc)

    Driving Electronic stability control (ESC)* WARNING ● Do not forget that the electronic stability control ESC cannot defy the laws of physics. This should be kept in mind, particularly on slippery and wet roads and when towing a trailer. ● Always adapt your driving style to suit the condition of the roads and the traffic situation.

  • Page 136: Starting And Stopping The Engine

    Starting The engine can only be started using a genuine SEAT key with its correct The engine is started when the key is in this position. Electrical devices with code.
  • Page 137 After starting a very hot engine, you may need to slightly press down the ac- celerator. The engine can only be started using a genuine SEAT key with its When starting a very cold engine, it may be a little noisy for the first few sec- correct code.

  • Page 138: Start-Stop Function

    Driving WARNING WARNING Please refer to the safety instructions ⇒  in Starting petrol engines on ● Never switch the engine off until the vehicle is completely stationary. page 135. ● The brake servo works only when the engine is running. With the en- gine switched off, more strength is needed to brake.
  • Page 139 ● Temperature setting is selected. ● The engine coolant temperature is insufficient. ● The driver seat belt must be buckled. ● The bonnet must be closed. ● The alternator is faulty, for example the V-belt has ruptured. ● If any of the conditions described in the previous section are not fulfil- ●...
  • Page 140 Driving Activating and deactivating the Start-Stop function Driver messages Fig. 114 The Start-Stop function button. Fig. 115 Display on the instrument panel during Start-Stop function operation. Every time the ignition is switched on, the Start-Stop function is au- tomatically switched on. When the engine is turned off by the Start-Stop function, this is displayed on the instrument panel.

  • Page 141: Manual Gearbox

    Driving Manual gearbox WARNING ● When the engine is running, the vehicle will start to move as soon as Driving with a manual gearbox a gear is engaged and the clutch released. ● Never select the reverse gear when the vehicle is in motion. Risk of accident.

  • Page 142: Automatic Gearbox

    Driving Automatic gearbox* Selector lever lock Gearbox programmes Fig. 118 Automatic gear- Fig. 117 Automatic gear- The automatic gearbox has got two gearbox programmes. Selecting the normal programme – Put the selector lever into position D. Fig. 119 Automatic Selecting the sport programme gearbox: instrument pan- –...
  • Page 143 Driving Driving The warning lamp  on the instrument panel lights up when the brake ped- al should be applied. This is essential when the selector lever is taken from – Press and hold the brake pedal. the P or N positions. –...
  • Page 144 Driving Holding the car on a hill WARNING – The brake must be always pressed down to prevent the vehicle from “rolling backwards” ⇒  . Do not try to prevent the vehicle ● As a driver, you should never leave your vehicle if the engine is run- ning and a gear range is engaged.
  • Page 145 Driving ⇒  F ig. 121 Changing gear in tiptronic mode* – Lightly press the selector lever forward to change up into high gears. ⇒  F ig. 121 – Lightly press the selector lever backwards change down into low gears. Changing gear with the steering wheel paddle levers* –...
  • Page 146 Driving To move selector lever from position P, the locking button on the selector Note lever handle must be pressed and the brake pedal depressed at the same ● The gear paddle levers on the steering wheel can be operated with the time while the ignition is switched on.
  • Page 147 Driving selector is in this position. The instrument panel display shows the selected WARNING (Continued) gear as well as the selector lever in position D. ● Power steering does not work when the engine is not running. That is If position N has been selected and you wish to select D, you must press the why it is much more difficult to turn the steering wheel.

  • Page 148: Handbrake

    Driving WARNING WARNING The gear change indicator is only an auxiliary function and in no case You could lose control of the vehicle if you accelerate on slippery road should be a substitute for careful driving. surfaces. Risk of serious injury. ●...
  • Page 149 Driving Applying the handbrake Parking ⇒  F ig. – Pull the handbrake lever up firmly 124. The handbrake should always be firmly applied when the vehicle is parked. Releasing the handbrake – Pull the lever up slightly and press the release knob in the di- Always note the following points when parking the vehicle: ⇒ ...
  • Page 150 Driving ● engine running and foot on the brake, WARNING ● besides having a gear engaged or being in neutral for manual gearbox and with the selector lever at positions S, D or R in automatic gearbox. ● Take measures to reduce the risk of injury when you leave your vehi- cle unattended.

  • Page 151: Rear Assist

    Driving Rear Assist WARNING (Continued) ● Vehicle load modifies the representation of the orientation lines dis- played. The width represented by the lines diminishes with vehicle load. Operating and safety warnings Pay special attention to the vehicle's surroundings when the inside of the vehicle of the luggage compartment is carrying a heavy load.
  • Page 152 Have the system checked by a specialised play: orientation lines.  workshop. Familiarising yourself with the system To familiarise yourself with the system, the orientation lines and their func- tion, SEAT recommends practising parking and manoeuvring with the rear...

  • Page 153: Parking Aid

    Driving Parking aid* Switching the system on and off ● The rear assist will switch on when the ignition is on or the engine run- ning, on engaging reverse gear (manual gearbox) or on changing the selec- General information tor lever to the R position (automatic gearbox). ●...
  • Page 154 Driving Description Possible faults The acoustic parking aid system will measure the distance between the rear If a continuous beep sounds for some seconds when the reverse gear is en- of the vehicle and any possible obstacle using four ultrasonic sensors loca- gaged, this indicates that there is a fault in the parking aid system.
  • Page 155 Driving Front parking aid ● Periodic cleaning of the sensors, take care not to damage or scratch them. When cleaning with high pressure washers or steam cleaners, the sensors should be sprayed for only a very short period and from a distance Description of more than 10 cm.
  • Page 156 Driving obstacle. Two speakers, one in the front and one in the rear, indicate the CAUTION location of the obstacle (either front or rear). ● Please note that low obstacles detected by the system may no longer be After a distance lower than approximately 30 cm, a continuous signal registered by the sensors as the car moves closer, so the system will not sounds (stop signal).

  • Page 157: Cruise Speed* (Cruise Control System)

    Driving Front parking aid with navigator view Once the speed setting has been saved, you may take your foot off the ac- celerator. WARNING It could be dangerous to use the cruise control system if it is not possible to drive at constant speed. ●...
  • Page 158 Driving Switching the cruise control system on and off Setting speed* Fig. 129 Turn signal and Fig. 130 Turn signal and main beam headlight lev- main beam headlight lev- er: switch and rocker er: switch and rocker switch for the cruise con- switch for the cruise con- trol.
  • Page 159 Driving Setting a lower speed ● if the vehicle is accelerated to over 180 km/h (112 mph), ● when the lever is moved in the direction of without fully being ⇒  F ig. 130 – Press the lower part SET– of the rocker switch engaged.

  • Page 160: Intelligent Technology

    Intelligent technology Advice Intelligent technology Brakes In an emergency, most drivers brake in time, but not with maximum force. This results in unnecessarily long braking distances. This is when the brake assist system comes into action. When pressing the Brake servo brake pedal rapidly, the assistant interprets it as an emergency.

  • Page 161: Anti-Lock Brake System And Traction Control Abs

    Intelligent technology Braking capacity and braking distance WARNING (Continued) ● If the brake fluid loses its viscosity and is subjected to heavy use, va- The efficiency of the brakes depends directly on the brake pad wear. This pour bubbles can form in the brake system. This reduces the efficiency of wear depends to a great extent on the conditions under which the vehicle is the brakes.
  • Page 162 Intelligent technology However, ABS will not necessarily guarantee shorter braking distances in all When the ASR is off, the warning lamp lights up . The ASR should normally conditions. The braking distance could even be longer if you brake on gravel be left on.

  • Page 163: Electronic Stability Control (Esc)

    Intelligent technology wheel. This may mean that in certain situations the torque delivered to the The forces acting on the braked wheel bring the vehicle back to a stable inner wheel is too high, causing the wheels to spin. On the other hand, the condition.
  • Page 164 Intelligent technology Drive wheel traction control system ASR It uses the ABS sensors to monitor the speed of the driven wheels. In case of an EDL fault the warning light for ABS lights up ⇒  p age 54. The traction control system prevents the driven wheels from spinning when At speeds of up to approximately 80 km/h (50 mph), it is able to balance the vehicle is accelerating ⇒ ...

  • Page 165: Driving And The Environment

    Driving and the environment Driving and the environment Running-in Running in tyres and brake pads New tyres should be run-in carefully for the first 500 km. New brake pads Running in a new engine should be run-in carefully for the first 200 km. During the first 200 km, you can compensate for the reduced braking effect The engine needs to be run in over the first 1,500 km (1000 miles).
  • Page 166 Driving and the environment Diesel engine particulate filter* – For engine oil changes, do not replenish with too much engine oil ⇒  p age 190, Topping up engine oil . – Never tow the vehicle to start it, use jump leads if necessary ⇒ ...

  • Page 167: Journeys Abroad

    Drive anticipating the traffic situation A vehicle uses most fuel when accelerating. When you anticipate the situa- SEAT importers and distributors will gladly provide information about the tion, you have to brake less often and, thus, accelerate less. If it is possible,...
  • Page 168 A badly serviced engine can consume up to 10% more fuel than necessary.

  • Page 169: Environmental Friendliness

    ● The use of water-soluble paints  Environmental protection is a top priority in the design, choice of materials and manufacture of your new SEAT. Constructive measures to encourage recycling ● Joints and connections designed for easy dismantling ● Modular construction to facilitate dismantling ●...

  • Page 170: Trailer

    Trailer Trailer Trailer towing load on the ball joint of the towing bracket, but do not exceed the specified limit. The figures for trailer weights and drawbar loads that are given on the data What do you need to bear in mind when towing a trailer? plate of the towing bracket are for certification purposes only.
  • Page 171 Trailer Speed Note The stability of the vehicle and trailer is reduced with increasing speed. For ● Towing a trailer places additional demands on the vehicle. We recom- this reason, it is advisable not to drive at the maximum permissible speed mend additional services between the normal inspection intervals if the ve- in an unfavourable road, weather or wind conditions.

  • Page 172: Fitting A Towing Bracket

    In certain versions this may entail fitting a heat insulating plate, 65 mm (minimum) which is why it is recommended that you go to a SEAT Dealer. In the event 350 mm to 420 mm (fully laden vehicle) that the plate is not installed correctly, SEAT is exempt from any liability.

  • Page 173: Vehicle Maintenance And Cleaning

    Vehicle maintenance and cleaning Vehicle maintenance and cleaning General notes WARNING (Continued) ● Never use fuel, turpentine, engine oil, nail varnish remover or other Vehicle maintenance volatile fluids. These are toxic and highly flammable. Risk of fire and ex- plosion. Regular care and washing help to maintain the value of the vehicle.
  • Page 174 Vehicle maintenance and cleaning brushes used, its water filtering and the type of cleaning and preservative – Leave the wheels, sill panels etc. until last, using a different products. sponge or glove. Before going through a car wash, be sure to take the usual precautions such –...
  • Page 175 Vehicle maintenance and cleaning For the sake of the environment WARNING To protect the environment, the vehicle should be washed only in specially ● Never wash tyres with a concentrated jet (“rotating nozzle”). Even at provided wash bays, to prevent toxic, oil-laden waste water from entering large spraying distances and short cleaning times, visible and invisible the sewerage system.
  • Page 176 Vehicle maintenance and cleaning Polishing the paintwork Cleaning windows and exterior mirrors Polishing is only necessary if the paint has lost its shine, and the gloss can- Cleaning windows not be brought back by applying wax. Polishing products can be purchased –...
  • Page 177 Vehicle maintenance and cleaning Door lock cylinders CAUTION ● Never use warm or hot water to remove snow and ice from windows and The door lock cylinders can freeze up in winter. mirrors. This could cause the glass to crack! To de-ice the lock cylinders you should only use spray with lubricating and ●...

  • Page 178: Underbody Protection

    Vehicle maintenance and cleaning WARNING WARNING Please refer to the safety instructions ⇒  ● Never wash tyres with a cylindrical jet. Even at large spraying distan- in Steel wheel rims on ces and short cleaning times, visible and invisible damage can occur to page 176.

  • Page 179: Vehicle Interior Maintenance

    Vehicle maintenance and cleaning Good corrosion protection is particularly important in winter when the vehi- For the sake of the environment cle is frequently driven on salted roads. To prevent the salt corroding the ve- Fuel, grease and oil deposits could be removed when the engine is washed. hicle, the entire engine compartment should be thoroughly cleaned before The polluted water must be cleaned in an oil separator.
  • Page 180 Cloth seat covers and fabric trim cleaning – Apply these products very sparingly. Cloth seat covers and fabric trim on the doors, headlining etc. can be – Then wipe off with a soft, dry cloth. cleaned with a special interior cleaner or with dry foam and a soft brush.
  • Page 181 If large stains form on the belts, the automatic belt retractor will not work correctly. WARNING ● Do not use chemical cleaning agents on the seat belts, as this can im- pair the strength of the webbing. Ensure that seat belts do not come into contact with corrosive fluids.

  • Page 182: Accessories, Replacement Of Parts And Modifications

    SEAT Technical Service cannot be held liable for any damage caused by Despite a continuous observation of the market, SEAT is not able to assess modifications and/or work incorrectly performed. For this reason, we recom- the reliability, safety and suitability of parts that SEAT has not approved. For ®...

  • Page 183: Roof Aerial

    Mobile telephones and two-way radios ● external aerial incorrectly installed, ● transmitting power output in excess of 10 watts. SEAT has approved for your vehicle the use of mobile telephones and two- way radios providing under the following conditions: Note ●...

  • Page 184: Checking And Refilling Levels

    Checking and refilling levels Checking and refilling levels Refuelling – Remove the key and close the flap until it clicks into place. The tank cap is secured with an anti-loss attachment If the automatic filler nozzle is operated correctly, it will switch itself off as soon as the tank is “full”.

  • Page 185: Petrol

    Checking and refilling levels Types of petrol differ from each other according to the octane rating, for ex- WARNING (Continued) ample: 91, 95, 98 RON (RON = “Research Octane Number”, unit for deter- – If the spare fuel canister is made of metal, the filling nozzle must mining the knock resistance of petrol).

  • Page 186: Diesel

    SEAT recommends “genuine Volkswagen Group fuel additives for petrol en- the wrong type of fuel, do not start the engine. Seek assistance from speci- gines”. These additives can be bought at SEAT Authorised Services, where alised personnel. The composition of these fuels may severely damage the information on how to use them can also be obtained.

  • Page 187: Working In The Engine Compartment

    All service fluids and consumables, e.g. coolant, engine oil, spark plugs ● Never cover the engine with additional insulating materials, such as a and batteries, are under constant development. SEAT provides a constant flow of information to the Technical Services concerning modifications. For blanket.
  • Page 188 Checking and refilling levels WARNING (Continued) For the sake of the environment ● If you have to work underneath the vehicle, you must use suitable Service fluids leaks are harmful to the environment. For this reason you stands additionally to support the vehicle, there is a risk of accident!. A should make regular checks on the ground underneath your vehicle.

  • Page 189: Engine Oil

    Checking and refilling levels Before opening the bonnet ensure that the windscreen wipers are WARNING in rest position. If the bonnet is not closed properly, it could open while you are driving – To release the bonnet, pull the lever under the dash panel and completely obscure your view of the road.
  • Page 190 Checking and refilling levels Service intervals Vehicles with diesel particulate filter* Service intervals can be flexible (LongLife service) or fixed (dependent on The “Maintenance Programme” states whether your vehicle is fitted with a time/distance travelled). diesel particulate filter. If the PR code that appears on the back of the “Maintenance Programme” Only VW 507 00 engine oil, with reduced ash formation, may be used in die- booklet is PR QI6, this means that your vehicle has the LongLife service pro- sel engines equipped with particulate filter.
  • Page 191 Checking and refilling levels Engine oil additives – Pull out the dipstick. Wipe the dipstick with a clean cloth and insert it again, pushing it in as far as it will go. No type of additive should be mixed with the engine oil. The deterioration caused by these additives is not covered by the warranty.
  • Page 192 Checking and refilling levels Topping up engine oil  WARNING Oil is highly inflammable! Ensure that no oil comes into contact with hot engine components when topping up. CAUTION If the oil level is above the area do not start the engine. This could result in damage to the engine and catalytic converter.

  • Page 193: Coolant

    Checking and refilling levels Coolant WARNING Only change the engine oil yourself if you have the specialist knowledge Engine coolant specifications required! ● Before opening the bonnet, read and observe the warnings The engine cooling system is supplied from the factory with a specially trea- ⇒ ...
  • Page 194 The original additives should never be mixed with coolants which are not Top up coolant when the level is below the MIN (minimum) mark. approved by SEAT. Otherwise, you run the risk of causing severe damage to the engine and the engine cooling system.

  • Page 195: Washer Fluid And Windscreen Wiper Blades

    Checking and refilling levels – Do not fill above the “MAX” mark. CAUTION ● If you notice a change in the colour of the liquid because it has been in Closing the coolant expansion tank use for a long time, it is recommended to change it, as it will have lost some –...
  • Page 196 Checking and refilling levels Plain water is not enough to clean the windscreen and headlights. We rec- ommend that you always add a product to the windscreen washer fluid. Ap- proved windscreen cleaning products exist on the market with high deter- gent and anti-freeze properties, these may be added all-year-round.
  • Page 197 Checking and refilling levels – Extract the wiper blade from the wiper arm. Note ● The windscreen wiper arms can be moved to the service position only Fitting the wiper blade when the bonnet is properly closed. – Insert the wiper blade onto the windscreen wiper arm until it ●...

  • Page 198: Brake Fluid

    Checking and refilling levels ⇒  F ig. 143 Brake fluid – Place the blade as shown in the B and slide the adapter along until it engages. Checking the brake fluid level Check the condition of the wiper blade regularly. Change as required. If the windscreen wiper scrapes, it should be replaced if damaged, or cleaned if soiled.
  • Page 199 The SEAT Technical Service network has the necessary equipment and qualified personnel for collecting and disposing You can buy VW 501 14 standard brake fluid in a SEAT dealership or a SEAT of this waste material.

  • Page 200: Vehicle Battery

    Checking and refilling levels Vehicle battery WARNING (Continued) ● Fires, sparks, open flames and smoking are prohibited. When han- dling cables and electrical equipment, avoid causing sparks and electro- Warnings on handling the battery static charge. Never short the battery terminals. High-energy sparks can cause injury.
  • Page 201 – If there are air bubbles in the window, tap the window gently has special safety features. until they disperse. Genuine SEAT batteries fulfil the maintenance, performance and safety The position of the battery is shown in the corresponding engine compart- specifications of your vehicle.
  • Page 202 Checking and refilling levels WARNING ● We recommend you use only maintenance-free or cycle free leak-proof batteries which comply with standards T 825 06 and VW 7 50 73. This standard applies as of 2001. ● Before starting any work on the batteries, you must read and observe the warnings ⇒ ...

  • Page 203: Wheels And Tyres

    Wheels and tyres Wheels and tyres Wheels Concealed damage Damage to tyres and rims is often not readily visible. If you notice unusual vibrations or the vehicle pulling to one side, this may indicate that one of General notes the tyres is damaged. They should be checked immediately by a Technical Service.
  • Page 204 Wheels and tyres Tyre useful life 2. The tyre pressures should only be checked when the tyres are cold. The slightly raised pressures of warm tyres must not be re- duced. 3. Adjust the tyre pressure to the load you are carrying. Tyre pressure The correct tyre pressure is especially important at high speeds.
  • Page 205 The tyres and wheel rims are an essential part of the vehicle's design. Those alignment checked by a Technical Service. approved by SEAT are specially matched to the characteristics of the vehicle and make a major contribution to good road holding and safe handling ⇒ ...
  • Page 206 This can also apply to wheels of the same model. The use of old tyres respecting the environment. wheels or tyres which have not been approved by SEAT for use with your model may invalidate the vehicle's type approval for use on public roads.
  • Page 207 Wheels and tyres Wheel bolts Winter tyres must be inflated to a pressure of 0.2 bar (2.9 psi/20 kPa) high- er than the pressures specified for summer tyres (see sticker on fuel tank flap). The design of wheel bolts is matched to the rims. If different wheel rims are fitted, the correct wheel bolts with the right length and correctly shaped Winter tyres must be fitted on all four wheels.
  • Page 208 Wheels and tyres For the sake of the environment Note Fit your summer tyres again as soon as possible. They are quieter, do not In some countries, the maximum permitted speed with snow chains is wear so quickly and reduce fuel consumption. 50 km/h (31 mph).

  • Page 209: If And When

    If and when If and when Vehicle tools, spare wheel WARNING (Continued) ● Never start the engine when the vehicle is on the jack. Risk of acci- dent. Vehicle Tools ● If work is to be carried out underneath the vehicle, this must be se- cured by suitable means.

  • Page 210: Wheel Change

    If and when Snow chains – All vehicle occupants should leave the vehicle. They should wait in a safe area (for instance behind the roadside crash barri- For technical reasons, snow chains must not be used on the temporary er). spare wheel.
  • Page 211 If and when Wheel covers* – Remove the wheel and then fit the spare wheel. – Lower the vehicle. – Tighten the wheel bolts firmly with the box spanner. – Replace the hub cap.  After changing a wheel – Put the tools back in their storage location. Fig.
  • Page 212 If and when Loosening the wheel bolts WARNING Loosen the wheel bolts (only about one turn) before raising the vehicle with the jack, otherwise there is a risk of accident. Note ● If the wheel bolt is very tight, you may be able to loosen it by pushing down the end of the spanner carefully with your foot.
  • Page 213 If and when Raising the vehicle – Align the jack so that the arm of the jack fits around the rib un- der the door sill and the movable base plate of the jack is flat ⇒  F ig. on the ground 150.
  • Page 214 The wheel bolts should be clean and easily screwed. Before fitting the spare using the code number that a duplicate adaptor can be obtained from the wheel, inspect the wheel condition and hub mounting surfaces. These sur- SEAT Official Services.  faces must be clean before fitting the wheel.

  • Page 215: Anti-Puncture Kit Tms (Tyre Mobility System)

    If and when Anti-puncture kit TMS (Tyre Mobility WARNING (Continued) System)* ● All passengers and particularly children must keep a safe distance from the work area. ● Turn on the hazard warning lights to warn other road users. Introduction ● Use the tyre mobility set only if you are familiar with the necessary procedures.
  • Page 216 Tube for inflating tyres Note Warning provided by tyre pressure monitoring system ● A new bottle of sealant can be purchased at SEAT dealerships. Air bleed screw ● Take into account the separate Instructions Manual of the tyre mobility ON/OFF switch set* manufacturer.
  • Page 217 If and when ● Remove the tyre sealant bottle from the valve. WARNING ⇒  F ig. 152 ● Screw the valve insert again with the corresponding tool into the tyre valve. When inflating the wheel, the air compressor and the inflator tube may become hot.

  • Page 218: Fuses

    If and when 1.4 bar (20 psi / 140 kPa) and higher: Additional information and warnings: ● Working in the engine compartment ⇒  p age 185. ● Set the tyre pressure to the correct value again. ● Carefully resume your journey until you reach the nearest specialised workshop without exceeding 80 km/h (50 mph).
  • Page 219 If and when Vehicle fuses Identifying fuses situated below the driver-side dash panel by colours Colour Amp rating Grey Purple Light brown Brown Blue Yellow Fig. 153 Left side of White or transparent dash panel fuse box cov- Green Orange Opening and closing the fuse box situated below the dash panel ●...

  • Page 220: Changing The Bulbs

    If and when Note CAUTION In the vehicle, there are more fuses than those indicated in this chapter. If you replace a fuse with higher-rating fuse, you could cause damage to an- These should only be changed by a specialised workshop. other part of the electrical system.
  • Page 221 If and when Xenon /adaptive headlights* For the sake of the environment Dipped and full beam - D1S Please ask your specialist retailer how to dispose of used bulbs in the prop- Position - LED er manner. DRL (day light) - LED Turn signals - PY 21W...

  • Page 222: Single Headlight Bulb Change

    If and when Single headlight bulb change – Raise the bonnet. ⇒  F ig. 157 – Turn bulb holder -- to the left and pull. Single headlight bulbs – Remove the bulb by pressing on the bulb holder and turning it anti-clockwise at the same time.

  • Page 223: Double Headlight Bulb Change

    If and when – Raise the bonnet. – Raise the bonnet. ⇒  F ig. 158 ⇒  F ig. 158 – Move the loop in the direction of the arrow and – Move the loop in the direction of the arrow and remove the cover.
  • Page 224 If and when Side light – Fit the cover and close the strap. Make sure that the gasket sits well on the casing cover during the operation. – Check whether the new bulb is working.  Main beam headlight Fig. 162 Side lights. Fig.
  • Page 225 If and when – Move the loop in the direction of the arrow and remove the ⇒  F ig. cover 164. ⇒  F ig. 165 – Remove connector by pulling outward. – Extract the bulb and fit the replacement so that it sits correctly into the cut-out on the reflector.

  • Page 226: Afs Headlight Bulb Change

    If and when Turn signal AFS headlight bulb change AFS headlight bulbs Fig. 168 Turn signal light. – Raise the bonnet. Fig. 169 AFS headlight bulbs. ⇒  F ig. 168 – Turn bulb holder -- to the left and pull. Turn signal lights –...
  • Page 227 If and when Turn signal bulb Fig. 170 Turn signal light. – Raise the bonnet. ⇒  F ig. 170 – Turn bulb holder -- to the left and pull. – Remove the bulb by pressing on the bulb holder and turning it anti-clockwise at the same time.

  • Page 228: Changing Fog Light Bulbs

    If and when Changing fog light bulbs – Remove the metal clip situated on the upper part of the fog ⇒  F ig. 172 light pulling towards the exterior of the vehicle  Front fog light bulb Fog light, FR version Fig.

  • Page 229: Changing The Rear Bulbs

    If and when Remove the bulb holder Changing the rear bulbs Applies to the model: IBIZA / IBIZA SC Summary of LED tail lights ● Brake lights ● Side lights Bulbs ● Retro fog light Fig. 174 Fog light. ● Reverse lights ⇒ ...

  • Page 230: Tail Lights

    (Retro-fog light on driver side and reverse light on passenger side).  Applies to the model: IBIZA / IBIZA SC Access to tail lights Fig. 175 Left tail light. Fig. 177 Access to tail lights.

  • Page 231: Changing The Tail Lights (On Side Panel)

    If and when – When the bulb holder has been removed, press in the direction Applies to the model: IBIZA / IBIZA SC of the arrow and at the same time, turn in the direction of Changing the tail light bulbs ⇒ ...
  • Page 232 If and when Applies to the model: IBIZA ST Applies to the model: IBIZA ST Accessing the side light bulbs Changing bulbs Fig. 181 Removing the Fig. 180 Side lights. bulb holder. – Open the rear lid. – Remove the bulb holder by pressing the fastening clip ⇒ ...

  • Page 233: Changing The Tail Lights (On The Rear Lid)

    – On the rear lid lining there is a lid behind each light. – Remove the lid with a flat screwdriver, placing it in notch ⇒  F ig. 182. Applies to the model: IBIZA ST  Overview of tail lights Lights on the rear lid Bulb lamps Applies to the model: IBIZA ST ●...

  • Page 234: Changing The Side And Interior Bulbs

    If and when If the brake light and/or side light with LEDs have to be replaced, the tail Applies to the model: IBIZA / IBIZA SC light must be replaced.  Number plate light – Insert the flat part of a screwdriver into the special slot and re- move the bulb.
  • Page 235 If and when Assembly – Remove the connector and extract the bulb. After changing the bulb, fit the connector again. – Proceed in the reverse order, pressing gently on the outer edge of the side light. – Place the light in its moulding, pressing the left side. Once it is fitted into place, press the right side until you hear a click.

  • Page 236: Jump-Starting

    If and when Luggage compartment light* Jump-starting Jump leads The jump lead must have a sufficient wire cross section. If the engine fails to start because of a discharged battery, the battery can be connected to the battery of another vehicle to start the engine. Jump leads Jump leads must comply with standard DIN 72553 (see cable manufactur- Fig.
  • Page 237 If and when How to jump start: description 4. For vehicles without Start-Stop system: connect one end of the black jump lead to the negative terminal in the vehicle sup- – ⇒  F ig. plying electricity 189. – For vehicles with Start-Stop system: connect one end of the black jump lead to a suitable ground terminal, a solid piece ⇒ ...

  • Page 238: Towing Or Tow Starting

    If and when Connect the battery clamps so they have good metal-to-metal contact with Note the battery terminals. The vehicles must not touch each other, otherwise electricity could flow as If the engine fails to start, switch off the starter after about 10 seconds and soon as the positive terminals are connected.
  • Page 239 If and when Driving style CAUTION Towing requires some experience, especially when using a tow rope. Both When tow-starting, fuel could enter the catalytic converter and damage it.  drivers should be familiar with the technique required for towing. Inexper- ienced drivers should not attempt to tow.
  • Page 240 If and when Rear towline anchorage ● If the vehicle has to be towed more than 50 km (30 miles), the front wheels should be raised during towing, and towing should be carried out by a qualified person. ● The steering wheel is locked when the vehicle has no electrical power. The vehicle must then be towed with the front wheels raised.

  • Page 241: Technical Specifications

    Description of specifications Technical specifications Description of specifications Important information Abbreviation Meaning Cetane number, indication of the diesel combustion pow- Important Research octane number, indication of the knock resist- ance of petrol.  The information in the vehicle documentation always takes precedence over the information in this Instruction Manual.

  • Page 242: Vehicle Identification Data

    Description of specifications Vehicle identification data Identification plate The identification plate is located on the right rib inside the engine com- partment. Vehicle data The data sticker is placed on the inside of the spare wheel well, in the lug- gage compartment and on the rear cover of the Maintenance Programme.

  • Page 243: Information On Fuel Consumption

    Description of specifications Information on fuel consumption Weights Kerb weight refers to the basic model with a fuel tank filled to 90% capacity Fuel consumption and emissions of CO and without optional extras. The figure quoted includes 75 kg to allow for the weight of the driver.

  • Page 244: Wheels

    Description of specifications Drawbar loads Snow chains The maximum permitted drawbar load on the ball joint of the towing bracket Snow chains may be fitted only to the front wheels, and only for the follow- must not exceed 75 kg. ing tyres: In the interest of road safety, we recommend that you always tow approach- 175/70R14...

  • Page 245: Technical Specifications

    Technical specifications Technical specifications Checking fluid levels From time to time, the levels of the different fluids in the vehicle must be checked. Never fill with incorrect fluids, otherwise serious damage to the engine may be caused. Coolant expansion tank Engine oil level dipstick Engine oil filler cap Brake fluid reservoir...

  • Page 246: Petrol Engine 1.2 44 Kw (60 Ps)

    3/1,198 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC Top speed (km/h) Acceleration from 0-80 km/h (s) 10.3 10.3 Acceleration from 0-100 km/h (s) 15.9 15.9...

  • Page 247: Petrol Engine 1.2 51 Kw (70 Ps)

    3/1,198 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) 13.9 13.9 14.6...

  • Page 248: Petrol Engine 1.2 Tsi 63 Kw (85 Ps) Start-Stop

    4/1,197 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) 180 (5) 180 (5) 180 (5) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) 11.3...

  • Page 249: Petrol Engine 1.4 63 Kw (85 Ps)

    4/1,390 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) 11.8 11.8 12.4...

  • Page 250: Petrol Engine 1.2 Tsi 77 Kw (105 Ps)

    77 (105)/5,000 175/1,550-4,100 4/1,197 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. With a slight power loss IBIZA IBIZA IBIZA SC IBIZA SC IBIZA ST IBIZA ST Performance Manual Automatic Manual Automatic Manual...

  • Page 251: Petrol Engine 1.2 Tsi 77 Kw (105 Ps) Start-Stop

    Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) 10.2 Weight (in kg)

  • Page 252: Petrol Engine 1.6 77 Kw (105 Ps)

    Fuel 77 (105)/5,600 153/3,800 4/1,598 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. IBIZA IBIZA IBIZA SC IBIZA SC IBIZA ST IBIZA ST Performance Manual Automatic Manual Automatic Manual Automatic...

  • Page 253: Petrol Engine 1.4 Tsi Act 103 Kw (140 Ps)

    4/1,395 Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) 210 (5) 210 (5) 210 (5) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s)

  • Page 254: Petrol Engine 1.4 Tsi 110 Kw (150 Ps)

    Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) Weight (in kg)

  • Page 255: Petrol Engine 1.4 132 Kw (180 Ps) - Cupra

    Super 95 RON /Normal 91 RON Research Octane Number = Anti-detonation rating of the petrol. Slight power loss. Performance IBIZA SC Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) Weight (in kg) Gross vehicle weight...

  • Page 256: Diesel Engine 1.2 Tdi Cr 55 Kw (75 Ps)

    No. of cylinders/displacement (cm Fuel Min, diesel acc. to DIN EN 590 51 55 (75)/4,200 180/2,000 3/1,199 Cetane Number (cetane index) = Measure of the diesel combustion power. IBIZA IBIZA SC IBIZA ST IBIZA IBIZA SC IBIZA ST Performance DPF Start&Stop DPF Start&Stop DPF Start&Stop...

  • Page 257: Diesel Engine 1.6 Tdi Cr 66 Kw (90 Ps) Dpf

    Min, diesel acc. to DIN EN 590 51 66 (90)/4,200 230/1,500-2,500 4/1,598 Cetane Number (cetane index) = Measure of the diesel combustion power. Performance IBIZA IBIZA IBIZA SC IBIZA SC IBIZA ST IBIZA ST Manual gearbox Automatic gear- Manual gearbox Automatic gear-...

  • Page 258: Diesel Engine 1.6 Tdi Cr 77 Kw (105 Ps) With/Without Dpf

    Min, diesel acc. to DIN EN 590 51 77 (105)/4,400 250/1,500-2,500 4/1,598 Cetane Number (cetane index) = Measure of the diesel combustion power. Performance IBIZA IBIZA SC IBIZA ST Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) 10.5 10.5 10.9...

  • Page 259: Diesel Engine 2.0 Tdi Cr 105 Kw (143 Ps) Dpf

    Min, diesel acc. to DIN EN 590 51 105 (143)/4,200 320/1,750-2,500 4/1,968 Cetane Number (cetane index) = Measure of the diesel combustion power. Performance IBIZA IBIZA SC Top speed (km/h) Acceleration from 0-80 km/h (s) Acceleration from 0-100 km/h (s) Weight (in kg) Gross vehicle weight 1,690...

  • Page 260: Dimensions

    Technical specifications Dimensions IBIZA IBIZA SC IBIZA ST Length / Width (mm) 4,061/1,693 4,043/1,693 4,236/1,693 Height at kerb weight (mm) 1,445 1,428 1,445 Front and rear projections 857/735 857/717 857/910 (mm) Wheelbase (mm) 2,469 2,469 2,469 Turning circle diameter (m) 10.7...

  • Page 261: Index

    Index Index Anti-puncture kit ......213 Battery Changing ......199 Anti-theft alarm system .
  • Page 262 Checking ......199 Cloth seat covers cleaning ....178 turn signal .
  • Page 263 XDS ....... 160 Engine senger seat ......25 Driving Running in .
  • Page 264 Environment ......165 Front seat adjustment Environmental friendliness ... . 167 Lumbar support .
  • Page 265 Index Head restraints Main beam headlights Adjusting ......104 control lamp ......58 Jack Adjustment of the head restraint angle .
  • Page 266 Plastic parts ......174 Running in Rear seat Pollen filter ......131 Brake pads .
  • Page 267 Speed selector lever lock Seat belts ......16 Reserve indicator ..... 45 control lamp .
  • Page 268 ......174 Tyre mobility set Why wear seat belts? ....16, 24 Products for vehicle maintenance ..171...
  • Page 269 Index Windows ....... 84 Windscreen defrosting ....124 Windscreen washer fluid Control lamp .
  • Page 270 SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to under- stand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook.

Table of Contents

Save PDF