Table of Contents
Advertisement
264
If and when
Changing bulbs
All bulbs can be changed easily in the bulb holder.
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to the
right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check whether the new bulb is working.
– Re-install the bulb holder ⇒ page 264.
Position of the bulbs
Pos.
Fitting the bulb holder
The bulb holder is easy to fit.
– Check that the seal is seated correctly on the bulb holder.
Fig. 211 Position of the
bulbs in the bulb holder:
– Position the bulb holder on the rear light and align it so that it is
Example: Left rear light in
securely seated.
side panel
– Press the bulb holder into the rear light until it engages.
– Re-install the rear light ⇒ page 265.
⇒ fig. 211
Bulb function
A
Brake lights and rear lights
B
Rear light
C
Indicator light
Advertisement
Table of Contents
