Table of Contents
Advertisement
118
Lights and visibility
– Press the knob in again to prevent the setting from being
changed unintentionally.
This function enables or disables the switch for daytime running lights When
the function is enabled, the daytime running lights are switched on automat-
ically when the ignition is switched on.
Note
Please observe any relevant legal requirements which may apply in your
country.
Self-directing headlights*
When driving around bends, the headlights will light the
most important areas of the road.
The cornering light gives better illumination of the side of the road when
driving around a bend or taking a turn-off
light is controlled automatically depending on the speed and the steering
wheel angle.
The headlights are regulated automatically when you drive around a bend,
depending on how far you turn the steering wheel. The two main headlights
move at different angles to avoid that the front of the vehicle is left completely
in the dark.
Note
The system operates from a speed of about 10 km/h.
Hazard warning lights
The hazard warning lights are used to draw the attention of
other road users to your vehicle in emergencies.
Fig. 89 Self-directing
headlights when driving
⇒ fig.
89. The dynamic cornering
Fig. 90 Centre console:
Switch for hazard warning
lights
Advertisement
Table of Contents
