Seat EXEO 2009 Owner's Manual page 261

Hide thumbs Also See for EXEO 2009:
Table of Contents

Advertisement

Changing the DRL light bulb (day light)
The procedure for changing the bulbs on the front
passenger's side is the same as on the driver's side.
– Switch off the ignition and the lights.
– Raise the bonnet.
– Turn the bulb holder anti-clockwise, pulling it by the grip
⇒ fig. 202
and removing the bulb holder and the bulb.
– Replace the blown bulb in the bulb holder (press and turn anti-
clockwise to remove) with a new bulb (press and turn clockwise
to insert).
– Installation is in the reverse order.
Safety First
Fig. 202 DRL light (day
light)
Operating instructions
Note
Although it is not necessary, previously remove the rigid cover
fig. 205
for easier day light bulb changes.
Practical tips
If and when
⇒ page 261,
Technical Data
259

Advertisement

Table of Contents
loading

Table of Contents