Table of Contents
Advertisement
You can access the bulb holder for the inner rear lights via the inside
of the tailgate.
– Check which of the bulbs is defective.
– Take the screwdriver out of the vehicle's tool kit ⇒ page 236.
– Insert the screwdriver into the opening in the cover from the top
⇒ page 266, fig. 215
A
– Press on the tabs
A
arrows and remove the bulb holder by pulling in the direction of
A
the arrow
.
B
– Change the bulbs ⇒ page 267.
Changing the bulbs
All bulbs can be changed easily in the bulb holder.
Safety First
and detach the cover.
⇒ page 266, fig. 216
in the direction of the
Fig. 217 Position of the
bulbs in the bulb holder.
Example: Rear lights in
the tailgate
Operating instructions
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to the
right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check whether the new bulb is working.
– Re-install the bulb holder ⇒ page 267.
Position of the bulbs
⇒ fig. 217
Pos.
Bulb function
A
Reversing light
Rear light and
B
rear fog light
Fitting the bulb holder
The bulb holder is easy to fit.
– Check that the seal is seated correctly on the bulb holder.
– Position the bulb holder on the rear light and align it so that it is
securely seated.
– Press the bulb holder into the rear light until it engages.
Practical tips
If and when
Technical Data
267
Advertisement
Table of Contents
