Other External Lamps - Aston Martin Vantage S 2016 Owner's Manual

Main Beam Bulb
Access to the headlamp bulbs is
through a panel in each wheel arch
liner. Turn the steering to the opposite
lock from the headlamp unit with the
defective bulb. Using a flat blade, i.e.
a screwdriver or a small coin, release
the screw on the access panel and
remove the panel.
Using a screwdriver release the two
knurled screws and remove the
headlamp unit cover.
12.26
[A] : Dipped beam
[B] : Main beam
The main beam bulb (B) is
inboard on both the left and right
headlamp units.
Remove the access cover and turn
the bulb unit a quarter turn counterclockwise. Withdraw the unit and
disconnect the wiring harness plug.
Connect a new bulb unit (Refer to 'Bulbs', page 13.7), insert the bulb
unit and turn a quarter turn clockwise to lock. Install the headlamp
access cover and wheel arch liner access panel.

Other External Lamps

High Level Stop Lamp
The high level mounted stop lamp unit consists of LEDs and is not
repairable. If a high level mounted stop lamp LED fails, contact your
Aston Martin Dealer.
Front Indicator and Parking Lamps
If a front indicator or parking bulb fails to operate, contact your Aston
Martin Dealer. These lamps consist of LEDs and are not repairable.
Side Indicators
The side indicators comprise of LEDs and are not repairable. If a side
indicator lamp bulb fails, contact your Aston Martin Dealer.