_______________________________________________________________________________________________________________________
b.
Open the detector body as described in Section
completed:
Remove the four (4) screws (12mm) from the speaker assembly in the right side of the
•
detector body. Figure 96.
Check speaker assembly is in good working order and the speaker cable is correctly
•
sealed into the speaker assembly and the circlip is installed.
Check the speaker O-ring is clean, lightly greased and correctly positioned in its channel in
•
the detector body.
Position the speaker assembly and insert the four (4) screws (12mm).
•
c.
Assemble the detector as described in Section
E-Clip
Figure 96: Replacing Speaker Assembly
3.1 - Opening the Detector
3.2 - Closing the Detector
63
F3 COMPACT Service Manual
Body. Once
O-ring
Body.