Introduction - Minelab F3 COMPACT Service Manual

F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________

Introduction

a. Servicing the F3 COMPACT includes fault finding, repair and maintenance and is
designed to be simple and fast thereby reducing the amount of time a detector is unusable.
Repair and maintenance is based on line replaceable units which can be fitted to a detector
without the need for adjustment or calibration. Additionally, serviceable line replaceable units
can be exchanged between detectors as required.
b. Line replaceable units are sub-assemblies of the F3 COMPACT that can be purchased
from Minelab for the purpose of repairing the F3 COMPACT. Line replaceable units include the
following:
3004-0044
3004-0045
3004-0046
3004-0047
3004-0048
3004-0049
3004-0050
3004-0051
3004-0052
3004-0053
3004-0054
3004-0056
3004-0057
3004-0058
c. Servicing the F3 COMPACT can be conducted in the field (under clean and dry
conditions) or at local service centres. No special tools are required, it is recommended that
the F3 COMPACT Service Tool Kit be used.
Servicing the F3 COMPACT is restricted to the exchange of line replaceable units following the
identification of a faulty sub-assembly.
d. This manual should be read in conjunction with 4901-0247 Operations Manual F3
COMPACT ES. Additionally, from time to time, Minelab will issue Technical Service Notes which
serve to supplement the information contained in this manual.
e. Any questions regarding this manual or any repair procedure can be directed to Minelab
at Countermine@minelab.com.au
Coil Kit
Coil Pivot Kit
Shaft Kit
Camlock kit
Armrest Kit with Slide
Armrest Kit
Handle Kit
Battery Compartment Kit
Battery Lid Kit
Main PCB Kit
Switches Kit
Wiring Loom Handle Socket Kit
Speaker Kit
Wiring Loom Earset Kit
4