Minelab F3 COMPACT Service Manual page 19

_______________________________________________________________________________________________________________________
Turn the detector body over so it is on its left side.
•
Check the detector handle is correctly positioned on the detector as well as the armrest
•
slide. The slide rod must be positioned through the handle and armrest slide. The holes
in the rod detector slide must align with the holes in the detector body.
Check that the latch hinge and spring latch hinge are correctly positioned into the left
•
side of the detector body with the latch connected to the spring. Figure 19.
Slide rod passing through Armrest
Slide and Handle
Figure 18: Connecting Coil Cable and Fitting Hinge Cover
Figure 19: Latch Hinge and Spring Latch Hinge
19
F3 COMPACT Service Manual
Coil Connector Nut
Spring
Latch