Detector Body - Minelab F3 COMPACT Service Manual

F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
The battery lid can be replaced without opening the detector body if the tether is unscrewed from
Check the battery lid has an O-ring correctly in place. The O-ring must be clean and can
•
be lightly greased.
Check the battery lid closes onto the battery compartment. Close the battery lid.
•
b. Close the detector body as described in Section

3.9 Detector Body

a. The detector body is not a line replaceable unit. The following assemblies within the
detector body are line replaceable units and are available as service kits:
3004-0054 Switches kit
•
3004-0056 Wiring Loom Handle Socket Kit
•
3004-0057 Speaker Kit
•
3004-0058 Wiring Loom Earset kit
•
3004-0237 Dust Cap Kit
•
3004-0236 Chassis Kit
•
b. All parts are available individually as spare parts.
Figure 91: Opened Detector Body
NOTE
the battery lid.
58
3.2 - Closing the Detector Body.