Main Printed Circuit Board (Pcb) - Minelab F3 COMPACT Service Manual

Metal mine detector

Hide thumbs Also See for F3 COMPACT:

Table of Contents

F3 COMPACT Service Manual

_______________________________________________________________________________________________________________________

3.3 Main Printed Circuit Board (PCB)

The main PCB of the F3 COMPACT is a line replaceable unit and this section of the manual

describes the procedure for its replacement. Figure 30 shows the main parts associated with the

main PCB.

3004-0053 Main PCB Kit, is a service kit containing the main PCB and the associated parts,

when a replacement main PCB is required this part number should be ordered.

Repairs to and disassembly of the main PCB are not detailed in this manual. Repairs to the

main PCB should only be conducted by authorised Minelab Engineers.

Battery Connector

Figure 29: Detector Body and Main PCB

NOTE

Toroid Screw

Main PCB

Interface PCB

Cable 10 Way

Cable 6 Way Ribbon

Speaker Connector

Table of Contents