Juniper ACX7100-32C Hardware Manual page 119

• Disconnect the power cords.
• Ensure that you have disconnected any cables or wires attached to the router ports.
To remove an ACX7100-32C router from a rack or cabinet:
1. Have one person support the weight of the router while another person uses the screwdriver to
remove the front mounting screws that attach the chassis mounting rails to the rack or cabinet.
2. Slowly slide the router out of the rack, with the mounting rails attached to its sides.
3. Use the screwdriver to remove the mounting screws that attach the mounting blades attached to the
rear of the rack or cabinet.
4. Place the removed screws and mounting blades in a labeled bag. You will need them when you
reinstall the chassis.
5. Transport the router to your new location.
RELATED DOCUMENTATION
Unpack and Mount an ACX7100-32C Router | 60
111