Juniper ACX7100-32C Hardware Manual page 24

Table 5: Chassis Status LEDs on ACX7100-32C Routers
Name
SYS—System LED
MST—Primary LED
ID—Identification LED
RELATED DOCUMENTATION
ACX7100-32C System Overview | 2
Color State
Unlit Off
Green On steadily
Blinking
Slow blinking
Unlit Off
Green On steadily
Unlit Off
Blue Blinking
(Continued)
Description
The router is powered off or halted.
Junos OS Evolved is loaded on the
router.
The device is loading the Software or
the device is powering off.
The device is powering up.
The router is a linecard member.
The router is a standalone router.
The beacon feature is not enabled on
the router. You can enable this
feature by using the
beacon
command.
The beacon feature is enabled on the
router. You can disable this feature
by using the
command.
request chassis
request chassis beacon
16