Table of Contents
Advertisement
9.
Attach the power cable to the DC power source, and switch on the dedicated customer-site 2-pole
circuit breaker. Follow the instructions for your site.
NOTE: If more than one PSM is being installed, turn on all PSMs at the same time.
10. Observe the status LED on the power supply faceplate. If the PSM is correctly installed and
functioning normally, the status LED lights green steadily.
Figure 41: Install a DC PSM in an ACX7100-32C Router
Figure 42: Connect the DC Power Cables
RELATED DOCUMENTATION
ACX7100-32C Power System | 21
94
Advertisement
Table of Contents
Troubleshooting
