6.
Carefully slide the chassis with the rails attached on to the rack rails (see
Figure 22: Install the ACX7100-32C Router in a Four-Post Rack
7.
Install mounting screws into each of the front-mounting bracket holes aligned with the rack,
starting from the bottom, and tighten the screws.
secured to the front rails of the four-post rack.
Figure 23: ACX7100-32C Router Secured by Front-Mounting Brackets
8.
On the rear of the chassis, slide the rear-mounting blades on either side of the chassis until the
rear-mounting brackets at the end of the blades contact the rack rails (see
Figure 22 on page
Figure 23 on page 64
shows the router fully
64).
Figure 24 on page
65).
64