Juniper ACX7100-32C Hardware Manual page 88

9. Wait for the ZTP process to exit. A message appears on the console, confirming that the ZTP
process has stopped.
[edit]
root@# [ 511.430877] ztp.py[13237]: 2021-03-04 05:28:00 INFO: ZTP:(et-0/2/7) DHCP request
timed out
[ 511.432804] ztp.py[13237]: 2021-03-04 05:28:00 INFO: ZTP: checkZTPAbort: Upgrade
detected pending abort
[ 511.433586] ztp.py[13237]: 2021-03-04 05:28:00 INFO: ZTP: notifier loop user requested
ZTP abort
[ 511.485370] ztp.py[13237]: 2021-03-04 05:28:00 INFO: ZTP: exiting
[ 511.580800] ztp.py[31898]: Notice: PID found for app ztp in /var/run/pid/ztp.pid is
13237.Executing command: (/usr/sbin/cleanzk -c /var/run/zkid/13237.id;rm /var/run/zkid/
13237.id)
[ 512.614206] ztp.py[31898]: rm: cannot remove '/var/run/zkid/13237.id': No such file or
directory
10. (Optional) Give the router a name. If the name includes spaces, enclose the name in quotation
marks (" ").
[edit]
root@# set system host-name
11. Configure the default gateway.
[edit]
root@# set routing-options static route default next-hop address
12. Configure the IP address and prefix length for the management port on the router. On the
ACX7100-32C, the management port is the upper RJ-45 port on the right side of the port panel
and is labeled MGMT.
[edit]
root@# set interfaces re0:mgmt-0 unit 0 family inet address
host-name
address/prefix-length
80