Rack Requirements For Acx7100-32C Routers - Juniper ACX7100-32C Hardware Manual

Rack Requirements for ACX7100-32C Routers

ACX7100-32C routers are designed to be installed on four-post racks.
the rack requirements and specifications for ACX7100-32C routers.
Table 19: Rack Requirements for ACX7100-32C Routers
Rack Requirement Guidelines
Rack type Use a four-post rack that provides bracket holes or hole patterns that are spaced at 1-U
increments (1.75 in. or 4.45 cm), and ensure that the rack meets the size and strength
requirements to support the weight.
A U is the standard rack unit defined in
(document number EIA-310–D) published by the Electronics Industry Association.
Size, airflow, and
•
If you are mounting an ACX7100-32C flush with the front posts of a rack, ensure that
clearance
the distance between the front posts and the rear posts is between 23.2 in. (59 cm) and
requirements
30.5 in. (77.5 cm)
•
If you are mounting an ACX7100-32C in a recessed position from the front posts of a
rack, ensure that the distance between the front posts and the rear posts is between
25.2 in. (64 cm) and 32.5 in. (82.6cm).
Table 19 on page 39
Cabinets, Racks, Panels, and Associated Equipment
39
provides