Lenovo 5458 Installation And Service Manual page 483

166-818-001 IMM I2C Test Aborted
Explanation: Cannot execute duplicated request.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
Related Links:
v IBM Support Website
v Latest level of DSA
Latest level of BMC/IMM
v
166-819-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. SDR Repository in?update mode.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
166-820-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. Device in firmware update mode.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
166-818-001 • 166-823-001
2. Make sure that DSA and BMC/IMM are at the
latest level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
166-821-001 IMM I2C Test Aborted
Explanation: Command response could not be
provided. BMC initialization in progress.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
Related Links:
v IBM Support Website
v Latest level of DSA
Latest level of BMC/IMM
v
166-822-001 IMM I2C Test Aborted
Explanation: Destination unavailable.
Severity: Warning
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at
a time and try the test after each action:
1. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the
latest level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
166-823-001 IMM I2C Test Aborted
Explanation: Cannot execute command. Insufficient
privilege level.
Severity: Warning
Appendix C. DSA diagnostic test results
467