Lenovo 5458 Installation And Service Manual page 465

3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
201-869-000 Standalone Memory Test Aborted
Explanation: EFI/SAL Invalid parameter from
GetMemoryMap function.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
v Latest level of DSA
Latest level of BMC/IMM
v
201-869-001 Standalone Memory Test Aborted
Explanation: EFI/SAL Invalid parameter from
GetMemoryMap function.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
201-869-000 • 201-869-003
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
201-869-002 Standalone Memory Test Aborted
Explanation: EFI/SAL Invalid parameter from
GetMemoryMap function.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
201-869-003 Standalone Memory Test Aborted
Explanation: EFI/SAL Invalid parameter from
GetMemoryMap function.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Appendix C. DSA diagnostic test results
449