Lenovo 5458 Installation And Service Manual page 394

816f000d-0406ffff • 816f0013-1701ffff
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
4. Check the SAS cable.
816f000d-0406ffff The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
6)
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0406ffff or
0x816f000d0406ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
4. Check the SAS cable.
816f000d-0407ffff The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
7)
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0407ffff or
0x816f000d0407ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
378
System x3250 M5 Type 5458: Installation and Service Guide
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
4. Check the SAS cable.
816f000f-2201ffff The System
[ComputerSystemElementName] has
detected a POST Error deassertion.
Explanation: This message is for the use case when an
implementation has detected that Post Error has
deasserted.
May also be shown as 816f000f2201ffff or
0x816f000f2201ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0185
SNMP Trap ID: 50
Automatically notify Support: No
User response: If the specified sensor is one of the
following, ABR Status, Firmware Error or Sys Boot
Status: No action; information only.
816f0013-1701ffff System
[ComputerSystemElementName] has
recovered from a diagnostic interrupt.
(NMI State)
Explanation: This message is for the use case when an
implementation has detected a recovery from a Front
Panel NMI / Diagnostic Interrupt
May also be shown as 816f00131701ffff or
0x816f00131701ffff
Severity: Info
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0223
SNMP Trap ID: 50
Automatically notify Support: No
User response: No action; information only.