Lenovo 5458 Installation And Service Manual page 448

201-819-003 • 201-820-002
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
201-819-003 Standalone Memory Test Aborted
Explanation: The start-end address ranges in the
restricted area of the memory.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
v Latest level of DSA
Latest level of BMC/IMM
v
201-820-000 Standalone Memory Test Aborted
Explanation: Memory Upper limit is less than 16
Mbytes.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
432
System x3250 M5 Type 5458: Installation and Service Guide
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
201-820-001 Standalone Memory Test Aborted
Explanation: Memory Upper limit is less than 16
Mbytes.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
201-820-002 Standalone Memory Test Aborted
Explanation: Memory Upper limit is less than 16
Mbytes.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v