Lenovo 5458 Installation And Service Manual page 356

806f000f-220107ff • 806f000f-22010cff
CIM Information: Prefix: PLAT and ID: 0795
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI diagnostic code for this event can be found in the
logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Info Center for the appropriate user
response. Firmware Error : Sys Boot Status :
806f000f-220107ff The System
[ComputerSystemElementName]
encountered firmware error -
unrecoverable keyboard failure. (ABR
Status)
Explanation: This message is for the use case when an
implementation has detected that System Firmware
Error Unrecoverable Keyboard failure has occurred.
May also be shown as 806f000f220107ff or
0x806f000f220107ff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0764
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The
UEFI(POST) error code for this event can be found in
the logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-22010aff The System
[ComputerSystemElementName]
encountered firmware error - no video
device detected. (ABR Status)
Explanation: This message is for the use case when an
implementation has detected that System Firmware
Error No video device detected has occurred.
May also be shown as 806f000f22010aff or
0x806f000f22010aff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0766
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The
340
System x3250 M5 Type 5458: Installation and Service Guide
UEFI(POST) error for this event can be found in the
logged IMM message text. Please refer to the
UEFI(POST) error code in the "UEFI(POST) error code"
section of the Information Center for the appropriate
user response. Firmware Error : Sys Boot Status :
806f000f-22010bff Firmware BIOS (ROM) corruption
was detected on system
[ComputerSystemElementName] during
POST. (ABR Status)
Explanation: Firmware BIOS (ROM) corruption was
detected on the system during POST.
May also be shown as 806f000f22010bff or
0x806f000f22010bff
Severity: Info
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0850
SNMP Trap ID: 40
Automatically notify Support: No
User response:
1. Make sure the server meets the minimum
configuration to start (see Power-supply LEDs).
2. Recover the server firmware from the backup page:
a. Restart the server. b. At the prompt, press F3 to
recover the firmware.
3. Update the server firmware to the latest level (see
Updating the firmware). Important: Some cluster
solutions require specific code levels or coordinated
code updates. If the device is part of a cluster
solution, verify that the latest level of code is
supported for the cluster solution before you update
the code.
4. Remove components one at a time, restarting the
server each time, to see if the problem goes away.
5. If the problem remains, (trained service technician)
replace the system board.
Firmware Error : Sys Boot Status :
806f000f-22010cff CPU voltage mismatch detected on
[ProcessorElementName]. (ABR Status)
Explanation: This message is for the use case when an
implementation has detected a CPU voltage mismatch
with the socket voltage.
May also be shown as 806f000f22010cff or
0x806f000f22010cff
Severity: Error
Alert Category: Critical - CPU
Serviceable: Yes