Lenovo 5458 Installation And Service Manual page 297

Figure 194. 2.5-inch simple-swap hard disk drive with software RAID signal cable connection
for redundant power supply model
Cabling the hard disk drive with ServeRAID SAS/SATA controller
for fixed power supply model
This section shows the cable routing for the hot-swap and simple-swap hard disk
drive with ServeRAID SAS/SATA controller for the fixed power supply model.
Cabling the hot-swap hard disk drive with ServeRAID SAS/SATA controller
(fixed power supply model):
The internal routing and connectors for the hot-swap hard disk drive with
ServeRAID SAS/SATA controller (fixed power supply model).
The following illustrations show the internal routing and connectors for the
2.5-inch and 3.5-inch hot-swap hard disk drive models with ServeRAID SAS/SATA
controller.
Note: Make sure the relevant cables pass through the cable clips.
281
Chapter 6. Removing and replacing server components